2012 Industry Outlook: Momentum stalls

Modern’s 2012 outlook finds that overall market uncertainty has slowed materials handling spending and has increased facility consolidation and engineered process improvements. Cost containment has returned as the most important issue of the day.

By ·

What a difference a year makes. Our 2011 industry outlook results showed that the materials handling industry was finally turning the corner, with budgets for equipment spending increasing from an average of $395,000 in 2010 to $451,000 in 2011. However, our 2012 State of Warehouse/DC Equipment and Technology Survey conducted for Modern Materials Handling by Peerless Research Group (PRG) shows forward momentum has stalled a bit.

To get a complete outlook of the materials handling market, in addition to gathering feedback from readers, Modern reached out to industry experts for automatic identification and data collection, lift trucks, software and conveyor equipment. And, they’re seeing much of what our readers are reporting.

For example, our survey results tell us that companies are proceeding very cautiously and deliberately with their decisions to invest in materials handling solutions. In fact, 46% say they are taking a “wait and see” approach and making only mission-critical purchases. And, 40% of respondents say the economy has had little or no impact on materials handling spending and they are proceeding with investments. Average anticipated spending over the next 18 months has barely budged at $451,700. And, 92% of the respondents have rated cost containment as their No. 1 most important issue.

“What I hear from our members is that there is money out there, and there’s a lot of quote activity, however, people are being cautious with regard to when they are releasing orders,” says George Prest, CEO of the Material Handling Industry of America (MHIA). When they do release orders, Prest says, they are looking for increased productivity and throughput in various products and processes, especially in the warehousing and distribution segment.

With the economy in flux, the materials handling equipment industry’s short-term future is simply not as rosy as hoped. In the next two to three years, fewer respondents (55%, down from 62%) are planning to increase their spending.

Over the next few pages we’ll dig deeper into the data gleaned from the survey while tracking changes in the materials handling market over the past year.

Modern’s survey results
According to the respondents who say they are proceeding with investments, their dollars are going to such things as information systems, RF devices, picking and inventory systems, automation, storage and racking, and conveyors and lifts.

This year, 47% report spending the same amount on materials handling solutions as they did last year, while 35% report an increase. In 2011, the average spending increase was 25% and the median increase was 19%, compared to 17% and 12% in 2010, respectively.

Moving forward into 2012, 45% expect their company’s spending on materials handling solutions to stay the same, while 45% expect an increase and 15% anticipate a decrease. 

“One of the reasons our industry has seen growth is that there is money out there,” Prest adds. “However, companies are cautious about hiring people so they are investing in existing facilities and making their people more productive. That’s the sweet spot of our industry; that’s what we do.”

What do these numbers mean in terms of dollars? Over the next 18 months, 15% of respondents say they expect to spend more than $1 million, with 8% of those expecting to spend more than $2.5 million. In the meantime, 23% expect to spend less than $25,000, with the remaining 62% ranging in between. While the average, $450,000, was flat between 2011 and 2012, the median anticipated spend is up slightly from $77,000 to $85,000.

click here to download the PDF article
click here to download PDF article

AIDC technology
Investing in automatic identification and data capture technology is one way for operations to make people more productive. And, according to our survey results, 51% plan to do just that: invest in information technology hardware and software solutions, or automatic identification and data capture (AIDC) technology.

“What I saw in the survey results lines up perfectly with what I see in the small-to-medium business (SMB) market,” says Drew Nathanson, vice president of AutoID for the VDC Research Group. “The bigger guys have more money and are willing to be first and take more risk with their investments. The SMB market follows their lead and invests in well-established solutions. They don’t have the resources to risk,” explains Nathanson. So, whatever the solution, it has to be proven before they can adopt it. Nathanson adds that he sees that scenario as an underlying theme in this year’s survey results.

“Within the warehouse, distribution center and yard, we’re seeing growth overall in the AIDC market, about 5% to 6% in bar code, RTLS, RFID, as well as other AIDC solutions,” Nathanson says, adding that this growth supports the continuing trend of end users using multi-modal data capture in their operations. 

Lift trucks reaching up
Lift trucks and accessories top the list for specific equipment that companies plan to evaluate or consider in the next 12 months. And, the North American lift truck market, which was up about 20% over 2010, is expecting another good year in 2012, says Jim Moran, chair of the Industrial Truck Association (ITA) and senior vice president at Crown. 

Whether a company is growing or maintaining its fleet, Moran says the focus is on maximizing productivity within their businesses. “The market is seeing tremendous growth in products that involve fleet management
,” says Moran. Customers are interested in products outside of the lift truck itself—anything that manages the fleet and reduces costs, like data collection devices that gather information about the truck and the operator so they can turn that data into useful information that drives improvements.”

In regard to the trucks themselves, customers are investing in electric trucks, particularly narrow aisle, turret and high-level stock pickers that can lift higher than before. That said, there’s no doubt that people are being very cautious when it comes to spending. According to Moran, most end users are still making their purchases on an ad hoc basis, which has been the norm for the last couple of years.

This tracks with survey results that indicated that 43% of respondents are currently concerned about the availability of labor, and 49% express concern over this issue in the coming years. In the warehousing and distribution sector, 52% of respondents rate labor productivity and management among the most important best practices, and that number spikes to 70% two years from now.
“It’s always been a challenge to keep up with training and manpower,” says Moran. Today’s lift truck products are more sophisticated, but suppliers are making them easier to service because of shortage of people to service them. Lift trucks can perform more complex tasks, but at the same time, it’s easier to diagnose and service problems.”

A solid software market
Warehouse management systems (WMS) and enterprise resource planning systems (ERP) top the list for information management systems for specific materials handling equipment that companies plan to evaluate or consider in the next 12 months. 

In the supply chain management software market, spending is on the rise and likely the result of pent up demand after the economic downturn, says Clint Reiser, enterprise software analyst at ARC Advisory Group.

“Capital spending tends to be more volatile than the economy in general, but it’s rebounding and we have taken part in the rebound,” says Reiser. “The rate for supply chain planning applications is above trend.”

Other factors keeping the market going well, he says, are the rise of sales and operations planning solutions, tools that analyze supply in conjunction with demand, and tools that enable scenario planning on the fly. According to Reiser, companies have other IT systems in place, but they are using these planning tools to gather data from disparate systems and bring it together for better overall planning.

Steve Banker, service director of supply chain management at ARC agrees. The recession interrupted a positive trend, but, he says, “I think we’re back on an historical trend line of growth that is forecasted to be slightly higher than rate of inflation.”

According to the survey results, 23% say they will be investing in enterprise applications over next 18 months. But Banker says end users tend to be overly optimistic and he doesn’t expect that number to be quite that high. “Our experience is that these numbers are higher than when we get the real data from suppliers.”

Conveyor on the rise
Once again, caution seems to be the watchword when it comes to future investments in conveyor and sortation systems. Survey results indicated that 24% of respondents are proceeding with investments in equipment that includes conveyor, but CEMA reports an anticipated growth of 10% in the industry for 2012.

According to Bob Reinfried, executive vice president of the Conveyor Equipment Manufacturers Association (CEMA), it’s safe to say that every single category that CEMA tracks all had double digit increases over 2010, which he also attributes to pent up demand. 

According to Reinfried, unit-handling equipment was the driving force. In unit handling, meaning equipment that handles light-to-medium loads of 500 pounds or less, 2011 was a record year for conveyor shipments, with about 30% growth that translated into about $8.5 billion. With orders taking about six to nine months to result in a shipment, that means there’s more money in the pipeline for suppliers.

2011 Industry Outlook: Optimism shines
Materials handling industry experts report that 2010 was better than expected and believe that we’re painting a brighter picture for 2011.

click here to download the PDF article
click here to download PDF article

About the Author

Lorie King Rogers
Lorie King Rogers, associate editor, joined Modern in 2009 after working as a freelance writer for the Casebook issue and show daily at tradeshows. A graduate of Emerson College, she has also worked as an editor on Stock Car Racing Magazine.

Subscribe to Modern Materials Handling Magazine!

Subscribe today. It's FREE!
Find out what the world’s most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today!

Latest Whitepaper
Hydrogen, the Future of Materials Handling
Large, successful organizations are integrating hydrogen fuel cell technology into their lift truck fleets and benefiting from lower operational costs, reduced emissions and improved reliability.
Download Today!
From the October 2016 Issue
Brownells’ new Iowa distribution center has taken touches—and miles—out of the order fulfillment process and increased throughput with near 100% accuracy.
System Report: Brownells new DC is flexible and responsive
Pallet Usage Report: Pallets Remain Critical in the Modern-Day Warehouse
View More From this Issue
Subscribe to Our Email Newsletter
Sign up today to receive our FREE, weekly email newsletter!
Latest Webcast
Pallets: Supporting Product, Processes and the Enterprise
The smallest leak in performance or cost can bring a lean, nimble and speedy supply chain to a halt. During this 30-minute webcast we'll examine how Modern's readers use pallets to keep the wheels turning as they maneuver a road filled with sharp edges and potholes.
Register Today!
Modern Materials Handling’s 2017 Casebook Collection
The 2017 Casebook features more than 35 case studies that put the spotlight on successful innovation...
Brownells: Designing for Efficiency and Growth
Brownells’ new Iowa distribution center has taken touches—and miles—out of the order...

Industry celebrates National Manufacturing Day
Fourth annual Manufacturing Day is a grassroots effort by U.S. manufacturers to improve the public...
American Eagle Outfitters’ omni-channel journey
The fashion retailer has used warehouse execution software and automation to create a true...