Family of 36 lift and tilt tables provide work positioning capabilities for every need in production and assembly operations. The lifts are available with capacities from 2,000 to 5,000 pounds, and with vertical travels of 24, 36 and 48 inches. Platform sizes range from 24 inch x 36 inch up to 48 inch x 64 inch, with tilt angles of 30, 45 and 60 degrees. The 45- and 60-degree tilters have double-acting cylinders, which ensure smooth platform return. A remote power unit allows easy servicing. All units come equipped with a cable carrier to eliminate loose hydraulic lines. Optional features include bellows skirting and fork pockets.
Advance Lifts Inc.
800-843-3625
www.advancelifts.com

Ball-transfer system for moving heavy objects without straining the body can support up to 750 pounds. It consists of a pattern of omnidirectional steel balls, each inside a steel housing. The unit is inserted into a laminate work surface in either a fixed or pneumatic position. Raised ball units allow the product to roll effortlessly in any direction, easing strain on the operator. Systems are free of gaps and pinch points for extra safety. It also can be installed on moveable carts and lift tables; when product is moved to a new location it will consistently have a supportive surface, reducing the risk of damage.
Production Basics Inc.
617-926-8100
www.pbasics.com

Stationary bin tilter lets operators lift and tilt bins so gravity feeding of parts occurs at the ergonomically correct height. The unit reduces operator fatigue by minimizing bending, reaching, stretching and lifting. With its self-contained 110 volt, 1-1/2 horsepower pack, the unit provides capacities of 2,000 or 4,000 pounds. It also features an exclusive PentaFlow hydraulic cylinder, which is completely sealed and continuously lubricates all components with fresh oil.
Pentalift Equipment Corp.
519-763-3625
www.pentalift.com

Backsaver lift tables are available in more than 1 million different configurations, providing optimum flexibility for the operator. Standard lifts come with capacities ranging from 500 to 6,000 pounds and can be customized with higher capacities. Lifting heights are available up to 56 inches, which also can be customized to accommodate higher lifting requirements. Tabletops come with special edging that eliminates sharp corners and improves visibility. Standard features include adjustable down speed; contoured legs that provide extra width at the pivot point; and oversized, low-pressure hydraulic cylinders. Optional features include anti-skid, conveyor and tilting tabletops; fiber-optic, auto-reversing toe sensors; and a variety of wheels and casters.
Southworth Products Corp.
207-878-0700
www.southworthproducts.com

EZ-3 series pallet loaders manually load and unload pallets between a feed conveyor and transfer conveyor. Load-weight compensating brings the top of the load closer to the worker, reducing pallet loading time by up to 40 percent and increasing productivity. It easily adjusts for varied loads without guessing or changing the springs. Features include a Firestone Airstroke actuator, which provides maximum load adjustability, and heavy-duty steel construction throughout. An automatic-conveyor top roller brake minimizes pallet movement during loading, while automatic toe guards provide extra safety for operators.
Bishamon
800-358-8833
www.bishamon.com

TiltLift lift tables feature infinite adjustability of tilt to 90 degrees, providing convenient, customizable positioning of materials. The unit can be furnished with intermediate degrees of tilt to fit individual requirements. An optional lip at the lower edge helps retain the product load. Capacities range from 2,000 to 6,000 pounds. Units are available with a standard 115-volt push-button control or covered foot switch with a 10-foot power-control cord.
American Lifts
800-670-4386
www.americanlifts.com

The iTrolley is an intelligent, overhead crane-rail system that minimizes the starting and stopping strain that contributes to injuries and a reduction in productivity. It is DC servo-driven, which masks the momentum and inertia of the overhead crane and reduces the energy required to perform each cycle. The operator simply pushes the load in the intended direction and the intelligent system responds at the same speed as the operator's motion. The iTrolley can be installed on existing or new rail systems, including flexible cable/chain-based and rigid arm systems. Cobotics Inc.
847-425-1200
www.cobotics.com

Infinitely adjustable bench workstation enables on-the-run height adjustment while the bench is in an upright position. Most benches are limited to adjustment on 1-inch centers only, and must be laid on their sides to remove the bolts and reposition. This unit's sliding leg-bolt design lets users adjust the height anywhere between 29 and 37 inches by simply loosening the four bolts. Sliding motion makes it easy to match the height of the workstation to another work surface. The workstation also features leveling feet to adjust for uneven floors.
Lyon Workspace Products
800-323-0096
www.lyon-metal.com 

Liftronic electronic zero-gravity load balancer is an ergonomic lifting device for payloads up to 270 pounds. The system consists of an electronic load balancer in versions from one to four ropes, a standard or customized load attachment, and a support structure. It produces a lifting force equal and opposite to the weight of the load. The balancer has a pivoting, jointed arm that can assume a variety of positions within a 10-foot radius. If a power failure occurs, a release-prevention mechanism is activated. The unit also will not lift if the load has not been gripped correctly.
Scaglia America Inc.
704-357-8811
www.scaglia.it 

ETS series of elevating tables automatically rise or lower as materials are added or removed, increasing productivity while reducing harmful bending and twisting motions. Counter-balanced springs can easily be added or removed to adjust weight-to-height sensitivity, allowing the operator to set the table to fit each application. Tables are available with capacities ranging from 230 to 1,120 pounds. A standard ergonomic handle allows the table to be moved from one location to another. The unit is available in custom sizes.
Vestil Manufacturing Co.
800-348-0868
www.vestil.com

CM Max air balancer allows precise positioning or repetitive transferring of loads as heavy as 600 pounds. With up to 8 inches of float, the user can hand-position loads easily and precisely. Standard end tools available include vacuum lift, vertical core lifter, horizontal core lifter and box gripper. The unit can be customized with end tooling designed for specific applications.
Columbus McKinnon Corp.
800-888-0985
www.positech-solutions.com

Air tables help position loads of all sizes with a minimum of operator effort. One model directionally guides packages and products without any human intervention or moving parts. Another table allows the air supply to be reversed, effectively clamping the item in place with substantial vacuum force. A third design conveys granular products, extremely lightweight items and bagged products.
Glasgow Inc.
516-561-8890
www.glasgowproducts.com

This multifunction workbench can be used by several people simultaneously for a variety of applications, including service, repair, research and technical work. It features a flexible, modular design that allows configuration in numerous heights and lengths. Modular cabinets can double as pedestals for cost-effective custom storage beneath the workbench. The bench is available in lengths of 8 feet to 12 feet, with depths of 30 or 36 inches. Dividing and partitioning accessories for the drawers creates customized storage.
Lista International Corp.
800-722-3020
www.listaintl.com