The enhanced RoughDeck series of floor scales now offers a rugged aluminum junction box that is mounted as a slide-out tray. Surrounded by a six-inch steel channel frame welded to a durable steel deck, the junction box provides rigidity. The addition of quick-connect cables that plug into the pre-wired junction box also reduce set-up time. The RoughDeck series, which offers capacities up to 30,000 pounds, features a load cell that is constructed of alloy steel and includes a welded seal.
Rice Lake Weighing Systems
Enter 403 at MMH Reader Service

The I-Zone area detection system utilizes infrared technology to sense if a pedestrian is within seven feet of a high-speed door. Preventing a door from closing when someone enters the seven-foot zone, the safety device's sensors monitor both sides of a door opening and create beams that cross to form the safety zone. These sensors also reverse the door if it is beginning to close. An alarm indicates users of the sensor's potential malfunctioning problems.
Rite-Hite Doors
Enter 404 at MMH Reader Service

Three AC induction motor controllers are designed for 24-80V battery systems with 60-800Arms 2 minute current ratings. One power controller model is suitable for small equipment such as pallet movers and floor maintenance equipment. The other two models are fully featured CANbus-compatible controllers for mid-range and larger equipment like forklifts and aerial platforms. All models incorporate a vehicle control language program, which is tuned to industrial vehicle control and is set with pre-defined functions such as battery monitoring, input/output control and PID.
Curtis Instruments Inc.
Enter 405 at MMH Reader Service

Two additional Zebra print engines are available for use with the Model 5200 label-printer applicator. Each system includes a choice of a high-density, on-demand thermal/thermal transfer printer that provides crisp text, in-spec bar code and graphics. The Zebra Pax3 printers are available in 203- or 300-dots-per-inch models and accommodate pressure-sensitive labels up to 6-inches wide at speeds up to 12 inches per second.
Weber Marking Systems, Inc.
Enter 406 at MMH Reader Service

The LD-100S label dispenser has a foot-switch controlled advance mechanism to dispense transparent and small labels that ordinarily cannot be sensed by electronic means. When an operator presses the footswitch for the next label, a variable speed control causes the labels to advance at the desired speed. Constructed of rugged heavy-gauge steel, the dispenser is equipped with a roll of labels up to four inches wide and accommodates up to 8-1/2-inch label rolls and core diameters between 1-1/2- and 3-inches.
Labelmate
Enter 407 at MMH Reader Service

A series of lightweight, portable bench scales combine accuracy and ruggedness. The scale's resolution is as low as 0.002 pounds, and maximum capacity is 150 pounds. With a 12- x 16-inch stainless steel platform and load sensors, the scales are rugged and corrosion resistant. Additional features include a full-function digital indicator with 1-inch high graphics, pushbutton tare, metric conversion, automatic calibration and USB or RS-232 computer interface compatibility.
Arlyn Scales
Enter 408 at MMH Reader Service

Designed for efficient and safe order picking, a stock selector has all controls located on the elevating operator compartment to provide complete maneuverability. Operators can pick orders at various levels and move safely to another location without lowering the platform. The unit is 32 inches wide, making it suitable for narrow aisles.
Big Joe Manufacturing Co.
Enter 409 at MMH Reader Service

BOSS sorter control module designed specifically for high-speed sortation is a software package that can handle more than 200 cartons per minute at speeds up to 600 feet per minute. The module combines advanced conveyor and sortation controls, system diagnostics, real-time data capture and human-machine interface in a single integrated software unit.
FKI Logistex Automation Division
Enter 410 at MMH Reader Service

A load transfer station with pallet dispenser (LTS-PD) can decrease pallet transfer times, increase transfer efficiency and enhance pallet and load alignment. The LTS-PD saves labor by allowing a single forklift operator to perform the entire transfer process. At a speed of 45 seconds per cycle, the forklift operator can place a load in the station and have it transferred to another pallet without assistance from an additional operator. The unit simplifies warehousing and shipping by efficiently transferring loads to alternative pallets. It is ideal for capturing FDA required in-house pallets to reduce pallet replacement and repair costs.
Columbia Machine, Inc.
Enter 411 at MMH Reader Service

The MultiPac is a bi-colored container featuring three stacking levels on a 24- x 20-inch footprint. Pivoting steel bails swing in for stacking, creating a 5.8-inch internal height for multiple layers of products. When the bails swing out, the container stacks on molded-in posts to create a 4.2-inch internal height. Turned 180 degrees, the container nests with a 2-inch internal height.
Buckhorn
Enter 412 at MMH Reader Service

Supporting labels between one and four inches wide, the GLR-50 label rewinder operates at speeds up to ten inches per second. Features include automatic speed control and an auto-switching power supply for 100-250 VAC and 47-63 Hz.
Label Accessories Inc.
Enter 413 at MMH Reader Service

A 20-station tray cart system handles 20 trays that have a permanent static dissipative elastomer inlay material for cushioning and protecting electrostatic discharge sensitive PC boards and assemblies. Including a cart, trays and inlays as a turnkey unit, the tray cart is equipped with 26- x 18- x 1-inch trays. The elastomer cushion material has excellent tear and cut resistance and is impervious to damage from leaded components. Molded Fiber Glass Tray Co.
Enter 414 at MMH Reader Service

Featuring a crushing power of 38,000 pounds, a hydraulic drum crusher reduces drum storage space and disposal costs by crushing 55-gallon steel drums down to approximately six inches. Components include a pressure relief valve to prevent overloading, a door interlock system, and a dual speed hydraulic pump providing 25-second cycle time.
Vestil Manufacturing Co.
Enter 415 at MMH Reader Service

A radio frequency identification (RFID) kit is compatible with the CL408e and CL412e label printers featuring serial numbers above 20390000. Utilizing high-frequency chips embedded in the labels, the RFID kit enables the printers to simultaneously print labels and program the chip inside.
SATO
Enter 416 at MMH Reader Service

A new line of steel shelving, pick racks, and storage cabinets are manufactured from 22-gauge steel with baked enamel finish. The pick racks provide convenient, high-density storage with bench-height, freestanding, and mobile styles. The cabinet systems provide protection for parts and products from dust, damage, and theft.
Akro-Mils
800-253-2467
www.akro-mils.com
Enter 421 at MMH Reader Service