Ideal for storing molded plastic sheets, sheet steel and other materials, full extension shelves with a vacuum lift offer capacities ranging from 200 to 40,000 pounds per shelf. Users simply roll out the shelf, lower the vacuum lift, pick up the item and move it to a workstation.
Proper Storage Systems Inc.
Enter 393 at MMH Reader Service

The series 900 and 950 cantilever racks are available in single and double uprights with a range of weight capacities between 3,000 and 25,000 pounds per column. Arm lengths for the high and super capacity racks are 18, 24, 30, 36, 42, 48, and 60 inches. Column heights are up to 20 feet. The straight and inclined arms between 12 and 60 inches long offer a variety of storing options.
Jarke Corporation
Enter 394 at MMH Reader Service

Protecting employees from falling while working in high-bay areas, a pallet-flow pick-module swing gate is ideal for picking bays with multiple deep pallets in which pallet flow prohibits the use of dual gate safety devices. The gates fit into all manufacturers' rack, are easily assembled and are 42 inches in height with various widths available. Hinge brackets attach to existing rack and the gates then attach to the brackets. When pallet is pushed into position on pallet flow rails, the gates with strong torsion springs open automatically and close automatically once the pallet flows into its picking position.
Mezzanine Safeti-Gates Inc.
Enter 395 at MMH Reader Service

A full line of powder-coated wire decking with reinforced channels offers safety, strength and efficiency for storage. The decking permits high visibility for inventory inspection, improves air circulation and is easy to install and maintain. ITC Enter 396 at mmh.com/info

Prevent accidental load spills from the top shelf of pallet racks with the Cargo-Shield, a wire mesh panel restraint system that locks to pallet rack frames with simple latch fittings. The panels attach to frames by means of an offset upright post, which allows users to install the system without tools and easily move the panel up and down. In the "up" position, the panel guards act as a barrier to prevent load spills. In the "down" position, stockpickers have full access to products stored on the upper shelf of the rack.
Adrian Fabricators Inc.
Enter 397 at MMH Reader Service

Improving storage density and accessibility as well as safety and ergonomics, a crank-out sheet rack system requires only ten pounds of torque to move a 5,000-pound load. With the help of a crank, users can access drawers and then use sheet lifts, magnets, vacuum lifts or forklifts to handle heavy materials. The sheet rack systems are available in four models with four to eight drawers each. Drawer widths are 50 and 62 inches, lengths are 98, 122 and 146 inches and heights are between 4 and 12 inches.
Steel Storage Systems
Enter 398 at MMH Reader Service

Available in a variety of sizes and configuration, the MasterTrak overhead track high-density storage system allows maximum storage in a minimum space. A patented roller assembly eliminates binding, even on extremely uneven floors. Lengths of the overhead track range from 6 to 21 feet. Mobile intermediate shelf sections utilize caster locks, making assembly fast and easy. Adjusting the height of intermediate shelves is also simple and does not require dismantling the system or removing any other shelves.
Eagle Group
Enter 399 at MMH Reader Service

Constructed of high-strength steel, Invincible storage racks are available in a wide range of frame heights and beam lengths. Capacities are between 6,300 and 50,000 pounds depending on beam shelf spacing. Rack depths offered are 36, 42 and 48 inches. Post sizes available are 3 x 1-5/8 inches and 3 x 3 inches. A variety of accessories are also available, including rigid wall spacers, row spacers, post protectors, crossbars, anchoring bolts and base plate shims.
Wireway/Husky
Enter 400 at MMH Reader Service

Pin Rack is a portable rack with adjustable parts retainers that keep parts of various sizes and shapes in place during shipping. The rack is customized with a double-level sheet metal deck with the sheet metal perforated to accept drop-in "pins" for parts protection. Pins can also be covered with foam or rubber for additional protection. Weight capacity is 4,000 pounds.
Steel King Industries Inc.
Enter 401 at MMH Reader Service

A pushback rack system provides the same high-density storage as drive-in systems. Available in 2, 3, 4, 5 and 6 deep systems, the rack offers easier load access as all pallets are stored and retrieved directly from a front aisle. Pallets can be stored up to three or four loads high. Carts feature contrasting colors for easy identification.
SpaceRak
Enter 402 at MMH Reader Service

Called the "Bulldog," an impact-deflecting accessory can be installed on undamaged front frame post to reinforce the first 12 inches of the base of pallet rack columns. It uses 2-3/4-inch anchors to resist impact and eliminate frame post twist. Also offering impact-deflection is the Elite, a double leg front frame post repair kit. Features include bolted installation and 3-3/4-inch anchors.
MacRak
Enter 403 at MMH Reader Service

Constructed entirely of steel, Ridg-U-Span wide-span shelving is a rigid and stable hand-loaded, bulk storage system with a modular design for expansion. The upright frames are reinforced with welded horizontal and diagonal C-channel bracing and are available in heights ranging from 72 to 240 inches. The beams are constructed to accept plywood, particle board, wire or steel shelf material. An optional locking device prevents dislodgement of the beams from the upright columns.
Ridg-U-Rak
Enter 404 at MMH Reader Service

Suitable for low-volume case picking and high-volume split case picking, carton flow rack can be installed as a stand-alone unit or as a component of a larger pallet rack or pick module system. Users load cartons individually at the backside of the rack and flow them to the front.
Advance Storage Products
Enter 405 at MMH Reader Service

Added to the Quick Shipment Program is the RivetRite shelving unit, which can store almost any type of hand-loaded material and be shipped within 72 hours. The shelving units allow access to contents from all four sides and are easily assembled without special tools. Available are single-rivet high-density units up to 48 inches wide and double-rivet bulky-storage units for spans of 48 to 96 inches wide. A rigid boltless connection between beams and posts ensures structural integrity.
Penco Products Inc.
Enter 406 at MMH Reader Service

A line of wire decking is available in a variety of designs including flare decking, inverted channel and flush decking. The standard decking features a waterfall design with support channels to accommodate 1-1/2- or 1-5/8-inch step beams. While one design has flared support channels for use with box and structural type beams another design features inverted support channels for food storage and other sanitary applications.
Nashville Wire Products
Enter 407 at MMH Reader Service