Here is a look at some of the products introduced at NA 2004 in Cleveland.

A carton flow system integrates the concept of traditional flow rack with the flow properties of full-width roller track to efficiently transport products. Roller Rack carton flow units are easy to assemble without any tools. A Span-Track-Ready proprietary beam is provided.
Unex Manufacturing Inc.
800-695-SPAN
www.unex.com

Added to a line of ergonomic tilting carts is the Pump-Up Tilt Cart featuring a pump-up leveling device. This mechanism allows users to return partial or full loads to an upright position by simply pumping a foot pedal a minimal number of strokes. The cart's load capacity is 3,000 pounds. A speed-control dampening cylinder tilts the cart to 15-, 30-, 45- and 60-degree angles.
Topper Industrial
800-529-0909
www.topperindustrial.com

The compact and versatile Fill-Air Elite packaging system fits into single and multiple workstations to create void fill cushions on-demand. Electric and easy-to-use, the system is available in roll widths of 8, 10 and 12 inches and lengths of 5, 8 and 12 inches. To change the roll, users simply slide off the empty roll, replace it with a new roll, feed the edge of the film into the system and push the feed switch to resume inflation. Accessories include a photo eye, foot pedal and delivery systems that guarantee a supply of cushions for any dunnage application.
Sealed Air
201-712-7000
www.sealedair.com

Added to a line of AC-powered electric rider trucks is the ERC-GH lift truck, available in 4,000- and 6,500-pound capacities. Powering the lift truck is a transistorized AC-powered traction motor with seamless directional change and a brushless AC traction motor. Features include on-demand power steering, an auto deceleration system and seat-side hydraulic control.
Yale Materials Handling Corp.
800-233-YALE
www.yale.com

Operating with Windows CE.NET, the WORKABOUT PRO is a handheld computer featuring a wide range of expansion, radio and data input options. It is available in two models: the WORKABOUT PRO M has a monochrome touch display, 32 MB Flash and 64 MB SDRAM while the WORKABOUT PRO C adds a color touch display, an embedded Bluetooth radio and 128 MB SDRAM. The entry-level device runs on the Intel Xscale processor and utilizes standard radio technologies such as Bluetooth and 802.11b. Hardware and software development kits allow the WORKABOUT PRO to be highly customizable.
Psion Teklogix
800-322-3437
www.psionteklogix.com

Designed for use with adjustable speed controls, a line of inverter duty gear motors is rated at 3/8 horsepower, 230 volts, and 60 Hertz with three phases. The gear motor's operating range is 10 to 90 Hertz while its torque is up to 350 inch-pounds depending on style and shaft speed. Available gear ratios range from 5:1 to 75:1 and from 5:1 to 30:1 for right angle and parallel shaft configurations respectively.
Baldor Electric Co.
479-646-4711
www.baldor.com

Cadence Mobile Logistics is a tool incorporating speech-directed operations with bar code scanning and browser information on a wireless Pocket PC. The solution enables users to perform all warehouse operations within the Cadence Ware-house Management System. The system's software manages communication with mobile computers via a standard 802.11 wireless network. Through visual displays and verbal instructions, users receive and confirm task assignments.
Cadre Technologies Inc.
866-252-2373
www.cadretech.com

Featuring a modular tube frame, the rugged KT2-TF non-powered cart is designed to deliver small- to medium-sized parts to assembly lines. It can be configured for gravity flow conveying as well as outfitted for kitting and sequencing of assembly parts. Features include a low push force wheel system and a rotating upper frame with four soft detent positions. The cart's load capacity is 2,000 pounds.
K-TEC
216-431-6353
www.k-tec.bz

The VX5 vehicle-mount computer features a display that goes all the way to the edge for over 12 inches of viewing. It operates on Windows 2000 Professional and XP Professional and uses a Pentium III processor.
LXE Inc.
770-729-6643
www.lxe.com

A range of new storage systems includes steel shelving, shelf bins and pick racks. The steel shelving is constructed of 22-gauge steel and is available with and without bins. A shelf bin system is 36 inches wide by 75 inches tall and holds hopper-front poly-propylene bins measuring 12 and 18 inches deep with varying widths. For high-density storage, a pick rack system is also available in bench-height, freestanding and mobile styles.
Akro-Mils
330-253-5592
www.akro-mils.com

Suitable for 3- to 5-ton bridge crane applications, the C-Series Cleveland Tramrail end truck features highly durable wheels, gears and pinions. Its components are three times harder than similar I-beam crane parts, according to the supplier. An oversized yoke plate keeps channel frames and wheels parallel and square to the track surface for easy, consistent movement and longer track and component life.
Gorbel Inc.
800-821-0086
www.gorbel.com

A rack protection device is designed for systems where rack beams are attached close to the floor. Rack Sentry Cutout features a 5-inch opening for installation around typical beams while offering collision protection the length of the protector. It can be mounted on rack with beams as low as 6 inches above floor level and fits standard 3 x 3 inch and 4 x 3 inch rack columns.
Sentry Protection Products
888-COLUMN-0
www.sentrypro.com

With 6,000- and 10,000-pound capacities, the C6000 GT sideloader is designed to lift long loads up to 30 feet high. Its narrow aisle configuration and versatile maneuverability permit operation in confined spaces. Features include hydrostatic drive and brakes for precise speed control as well as various fork configurations and spreader-bar attachments for load handling.
Combilift Ltd.
281-507-0066
www.combilift.com

Mini skatewheel conveyor sections are ideal for flow racks for light duty parts handling and returns applications. The EF-6045 mini conveyor sections feature high-strength aluminum alloy rails, durable plastic wheels and stainless steel axles. Conveyor sections are available in 8 feet, 2 inches and 13 feet, 1-inch lengths.
Creform Material Handling System
800-839-8823
www.creform.com

For increased volume, the KitBin XT bulk container features panels and clips that let users join a second layer of walls together to form a two-level container. The clips allow the top half of a sidewall to be folded down for easier access. Assembled containers are 44 inches high with a load capacity of 2,200 pounds. Features include impact-resistant high-density polyethylene (HDPE) structural foam construction and temperature resistance.
Decade Products LLC
877-365-2887
www.decadeproducts.com

Available in 24-, 36-, 48- and 72-volt configurations, a line of high-performance lead acid batteries and battery charger are optimized for fast charging. Horizon batteries charge in 1/8 the time of standard battery charges, according to the supplier. Their ultra-low internal resistance prevents the batteries from overheating in service or under charge and allows them to be recharged without a cool-down period. The FazCharge is a 3kW, 36-volt, 85 ampere-hour charger.
EaglePicher Technologies LLC
602-794-9604
www.ephorizon.com

Featuring counterbalanced and reach lift capabilities, a fork-style automatic guided vehicle has a load capacity of 3,000 pounds. It is equipped with both laser guidance and laser safety bumpers that can dynamically vary in the field of safety de-pending on the requirements of the system.
Transbotics Corporation
704-362-1115
www.transbotics.com

For use in a range of applications, a weighing system features a PLC module that integrates the weighing functions in an easy-to-apply platform. Telemecanique Momentum interfaces with all load cells in a facility, making all weighing data available for control devices on the network. The system is networked to allow monitoring of the 15 scales involved in a customer's process. Its open framework also provides access to the information from any PC station on an Ethernet network.
Schneider Electric
800-392-8781
www.us.telemecanique.com

A warehouse control system (WCS) software module strategically controls the movement and storage of materials. WCS is an execution support system that directs efficient material flow by integrating the control of multiple materials handling systems with a single user interface. The module resides between the warehouse management, manufacturing execution or host system and the machine level controls of storage and transport equipment.
Siemens Dematic
616-913-7700
www.siemens-dematic.us

A high-speed hoist features an infinitely variable speed motor mated to a three-stage helical gearbox to move products up to 230 feet a minute. Loads weighing as much as 350 pounds can be easily maneuvered and precisely positioned by using a toggle switch and hand force pendant. To extend its rope life, the hoist has a single fall rope guided by a rope groove.
Demag Cranes & Components
440-248-2400
www.demag-us.com

With accuracy and quick response times, the DME 5000 series of reflex/retro-reflective distance measurement sensors are available in short-, mid- and long-range versions. The sensors are ideal for positioning storage/retrieval machines in automated storage and retrieval systems and other applications requiring precise distance measurement. Short-range sensors measure distances up to 70 meters with 0.05-millimeter resolution and 0.5 millimeter repeatability. With the same resolution, mid-range sensors measure up to 150-meter distances with 1-millimeter repeatability, and long-range versions measure up to 300 meters with 2-millimeter repeatability.
SICK Inc.
800-325-SICK
www.sickusa.com