The ED single phase, electric chain hoist line now includes two, ½-ton models: the single-speed ED1050S and dual-speed ED1050DS. Compact ED hoists can be easily installed and offer high lifting speeds. The dual-speed model includes a low-speed adjustment capability from zero to 100% of maximum speed. Features include a double braking system for added protection, heavy-duty motor, friction clutch to prevent overwinding as well as corrosion-resistant, nickel-plated load chain.
Harrington Hoists
800-233-3010
www.harringtonhoists.com

Custom designed for specific lifting applications, STRONG-MAG lifting frames securely move metal sheets in plants. The lifting frames can be easily attached to an overhead crane or a forklift and lowered onto the sheets to be moved, avoiding operator contact with sharp, metal sheet edges. The two different models—overhead or "portable" forklift versions—can be designed to handle sheets in widths of four, five or six feet and lengths ranging from eight to 12 feet.
Simonds International
800-343-1616
www.simondsinternational.com

The upgraded MSI-4300 Porta-Weigh Plus electronic crane scale features a rechargeable 12-volt, sealed lead acid battery and LED backlight display. The battery provides up to 300 hours of operation between charges and the six-digit, 1.6-inch high alphanumeric liquid crystal display with LED backlighting is easily read from a distance. Digital calibration and self-diagnostic circuitry provide simple maintenance.
Measurement Systems International
800-874-4320
www.msiscales.com

Lodestar Air XL air hoists have capacities from 2 to 7.5 tons and are metric-rated. Air pressure is 90 psi and lifting speeds range from nine feet per minute for the 7.5-ton capacity to 31 feet per minute in the 2-ton capacity model. Pendant controls provide precise load spotting and precision spool valves meter air for smooth starts. Spark resistant models for hazardous environments include copper-plated hooks and lower-bottom blocks, stainless steel hook latches and plated load chain.
CM Industrial Products
800-888-0985
www.cmindustrial.com

Wire rope hoists are available in capacities of three, five or 10 tons. The hoists feature a heavy-duty design, high cycling motors and accurate positioning with a 6:1, two-speed motor. The hoists also offer increased contactor life due to the low current switching that is controlled through an onboard microprocessor. Additional features include standard overload protection, upper and lower limit switches, brake wear monitoring and load spectrum recording.
Demag Cranes and Components Corporation
440-248-2400
www.demag-us.com

Ceiling-mounted workstation bridge cranes are ideal for facilities with limited floor space. The systems provide infinite coverage without interfering support columns. With crane interlock sections, ceiling-mounted systems can be linked to a monorail or another bridge crane. The ceiling-mounted systems feature a low-profile steel track that allows for maximum use of ceiling space. Standard systems are available in capacities from 250 to 4,000 pounds and up to 34-foot bridge lengths. Custom ceiling-mounted workstation bridge crane systems with telescoping bridges or cantilevered bridges are available for lifting loads outside the regular crane coverage area.
SPANCO
610-286-7200
www.spanco.com

The VPF-57 vacuum lifter features a custom lifting frame with two swiveling vacuum suction pads that can be adjusted and locked in place. Available with capacities up to 4,000 pounds, this lifter can be supplied with compressed air, 115-volt electric or battery-powered vacuum stations. Eliminating the use of straps and hooks that can damage molded parts, the VPF-57 also features an ergonomic handle with fingertip controls that can be fully integrated with any hoist.
Anver Corporation
800-654-3500
www.anver.com