Valu-Lift continuous vertical conveyors incorporate economical modular construction and a unique new platform for efficient high-speed operation, low maintenance, and simplified assembly. The units are well suited to cartons and other smooth-bottom unit loads, and is easy to install. The design consists of simple, lightweight interlocking molded polymer flights with steel connecting pins, lifting at a maximum speed of 118 feet/minute. Standard net lifting heights range from 8 to 14 feet. Other heights are offered. A maximum unit load is 26 inches long by 17 feet wide and 22 feet high with a weight of 50 pounds. Minimum loads are 10 inches long by 4 inches wide by 1 1/2 inches high, weighing 1 pound.
TKF, Inc.
513-241-5910

The Lite Material Lift features a capacity of 500 pounds, and can be easily moved within the factory or warehouse. Its compact size allows it to be moved into place, used, and then returned to storage. The lift was specially designed to offer simple installation with minimal skilled labor. It features up to a 4 by 4 foot platform, a 120-volt single-phase motor, and works on a chain drive system.
Joyce/Dayton Corp.
800-523-5204

Store up to nine pallet loads deep with a new push-back rack system that requires less force on the lift truck mast to input and remove pallet loads. Smooth and easy operation is made possible by a combination of low-profile, reduced-slope rack design and oversized, heavy-duty cart wheels. Another feature is a unique box-frame cart and box-frame front beam that provides a solid foundation for pallet loads and greater overall rigidity.
Ridg-U-Rak
814-725-8751

A pallet clamp is designed for handling a wide range of pallet stringers, from 1.25 to 5 inches wide. It is available on the supplier's EASi and Gofer model orderpickers. The clamp does not have to be manually engaged by the operator. It automatically engages when a pallet is picked up and disengages when the operator steps on the release pedal.
The Raymond Corp.
800-235-7200

Available in six industry-standard sizes, a new line of parts bins work with the company's existing shelving and metal systems to create an integrated storage solution. The durable bin stacks and hangs easily, while offering hopper fronts with curved design, large front label area, wide stacking ridges with molded-in stops and optional dividers. Five colors are offered.
LEWISBins+, a div. of Menasha Material Handling Corp.
877-97-LEWIS

A small-footprint sortation solution is for small- and medium-sized applications that process up to 4,000 packages and parcels an hour. The compact singulator enables bulk load packages to be unloaded quickly, separated, and then arranged for more efficient sorting. It has two incline belts that separate the stacks of parcels and packages. Once the flow has been reduced to a single layer, optical cameras record the item positions and determine the best way to separate the flow into a single-file stream. When singulation is complete, the stream of items is easily integrated into the automated induct of a variety of sorters.
Northrop Grumman Corp.
410-765-1521

New angled female connectors and double-deck terminal blocks featuring cage clamp compact connections have been added to the X-COM line. The new products are available as modular feed-through terminal blocks and ground conductor terminal blocks. With the angled female connectors, the terminal blocks offer two plug-in connections within a total thickness of only 59 millimeters from the mounting rail top surface. Product design parameters allow for a maximum voltage / current ratings of 300V, 10A. Wire range components within this group is 12-28 AWG.
WAGO Corp.
800-DIN RAIL

The BestReach drive-in, rigid-roller conveyor, truck-loading system offers a length of 66 feet that reaches from permanent warehouse or factory conveyor all the way into over-the-road trailers. Convenient controls located at the discharge end allow users to steer the unit and power in-and-out of trailers with ease. Line speed is easily adjusted from 0 to 135 feet/minute. Other features include large, solid-rubber tires that easily move over dock plates and uneven floors, PVC 120 24-inch wide friction belt, and optional fan and light at discharge end.
Best Diversified Products, Inc.
800-327-9209

A deep-lane storage system provides first-in/ first-out high-density product storage. When pallets are deposited in the storage system, the gravity flow design allows pallets to automatically travel to and accumulate at the discharge end. The system stores more pallets in less space than other systems. Storage of food, automotive parts, paper, and pharmaceuticals is well suited to the first-in/first-out concept.
Westfalia Technologies, Inc.
717-764-1115

The 32 by 38 inch Structo-Cell automotive pallet-lid system accommodates totes that previously were only used with 45 by 58 inch pallets. It is made of solid, one piece construction with a robust, heavy-duty design. Features include a 1 inch tall lip on the pallet, and wide bottom stringers with radius ramps for added strength.
Cookson Plastic Molding Corp.
888-738-8800

A new Interbus-compatible variable frequency drive (VFD) has been added to a line of direct machine-mount motor starters. The IP67-rated VFD provides a solution for applications that require speed control of three-phase motors. It is rated for 480VAC and offers a local, lockable disconnect switch. The base mounts to the machine, making the drive unit pluggable for ease of servicing. Easy to read, local LEDs inform the service personnel about current status or fault conditions. Added information is available via the Interbus network for the PLC, PC, or VME-based host system.
Phoenix Contact Inc.
800-586-5525

A high-density mobile storage system is mechanically assisted, and available in three different ratio drives to meet customers' needs. Increasing capacity is easy; units are expandable in both length and width for future facilities growth. The new three-spoke handwheel is easy to use, flush to the end panel, and takes up less space in the aisle. This mobile storage system is adaptable to meet requirements of the Americans with Disabilities act. A standard rolling carriage can handle loads up to 1,000 pounds/linear foot. Carriages come standard in black with a range of colors offered.
Equipto
214-443-9800

The BWF Series optical data transmission device offers a wireless control solution for storage/retrieval machines in automated storage and retrieval systems (AS/RS). Data is communicated with infrared technology through serial interfaces. Transmission range is up to 1,640 feet. Lightweight and compact, the device offers AC or DC control voltages and high-speed transmission. An alarm output is activated when light reception drops below basic operation value due to a misalignment.
AGV Products, Inc.
704-845-1110

Incorporating a fully addressable, 500-nozzle printhead, the LegiJet Model ML500 high-resolution ink jet coding system produces human and machine readable images up to 2.8 inches high. Single and two-dimensional bar codes, variable-sized text, plus graphics and logos can be printed on cartons or products with 188 dots/inch clarity at speeds up to 180 feet/minute. Font sizes from five points (0.06 inch high) to 280 points (2.8 inches high) are offered. Capital and lower-case letters, as well as bold and italic options are standard.
Weber Marking Systems, Inc.
800-225-0883

A combination sorter and transport conveyor system reduces the cost of handling packages. Known as Wally, the handling system features package carriers that ride on the top of a lightweight aluminum monorail track. Carriers may travel multiple paths using curves, diverts, inclines, and declines. The system also acts as a continuous sorter with excellent flexibility. Each carrier can handle loads up to 120 pounds. Features include only six wheels per carriage (two for load support and four for load stabilization) direct drive, brushless DC, in motor car, no belts or pullets, and single moving part in divert and merge unit. Operational costs are low and maintenance requirements minimal.
TSI Transport Systems, Inc.
941-387-0711

An ergonomic, control-reliable approach to safe machine-cycle initiation that helps prevent repetitive stress injuries associated with repeated mechanical push button operation is available. The Duo- Touch SG two-hand-control system in- cludes two photoelectric beam-break de- vices that activate when a finger or hand is placed on the button's touch surface. It also includes a DIN-mountable, microcontroller- based control module, which is 0.9 inches wide and has removable terminals for fast replacement.
Banner Engineering Corp.
888-373-6767

A new generation of spiral conveyors features a small footprint. Several models are available with outside diameters ranging from 5 feet 3 inches to 7 feet 9 inches, depending on load size. The conveyors provide continuous vertical conveyance and high throughput. Load capacity is 75 pounds/linear foot of conveyor for speeds up to 200 feet/minute. The standard angle of incline is only 9 degrees, which safeguards against loads from sliding or tumbling during operation. Overlapping slats, available in 12, 16, 20, and 24 inches, provide a smooth and efficient conveying surface suitable for a wide range of load types and sizes.
Ryson International
757-888-1010

Reliable first-in/ first-out product rotation for small and medium sized items is possible with a carton flow storage system. Three versions are available, rollers (PVC, steel), MaxTrack (plastic wheels), and skatewheel (steel wheels). Light- and medium-duty systems are designed for loads up to 66 pounds, while heavy-duty systems handle loads up to 220 pounds.
Interroll Corp.
800-362-9616