Subscribe to our free, weekly email newsletter!


Building the better unit load

Pallets don’t work in a vacuum. Getting the most from your unit load depends on how your pallets, materials handling systems and industrial packaging work together.
By Bob Trebilcock, Executive Editor
February 03, 2011

Build a better mousetrap and the world will beat a path to your door. Or, so the saying goes. Marshall White would like to build a better unit load. A professor emeritus at Virginia Tech, White spent years researching how to build a better wooden pallet. Today, he is president of a consulting firm, White and Co. , and focused on what he calls a systems-based approach to unit load design.

Just what is a systems-based approach to unit load design? The short answer, White explains, is an approach that understands that pallets, packaging materials, materials handling systems and transportation equipment don’t exist in a vacuum. The design of each of those components affects the performance of the others as a palletized load moves through the supply chain from a factory to a distribution center and on to the end customer for that load.

What’s the outcome of a systems-based approach to unit load design? White says it’s not just a better overall package, but there’s also cost savings to be had. “I can safely say there’s between 8% and 18% in avoidable costs that can be saved from a systems-based approach to the unit load,” says White.

While saving 8% to 18% on the cost of your unit load may sound like a no-brainer, White has to overcome some headwinds to get his message out. The most important impediment could be that most of those components are purchased in a silo.

“Most companies take a component-based approach to design with three different communities involved,” White says. “One is responsible for the packaging. Another is responsible for the pallet, and a third is responsible for the warehouse design and the unit load handling equipment. Each of those groups is under pressure to reduce their costs, and they do that without communicating with the other design community.”

The result: The team designing the conveyor system for a new warehouse may increase the spacing between rollers to save on the cost of the system. What they don’t realize is that the pallet now needs to be built from more expensive deck boards to carry the weight of the load across a wider span without buckling.

In the long run, it may make more economical sense to the enterprise to install a more expensive conveyor now and save big on pallets, stretch wrap and cartons over the long haul. But as long as conveyors, pallets, stretch wrap and cartons are designed and purchased by different teams, with different bonus incentives, it’s hard to get that message across.

“Until we change the business model so that these communities have an incentive to work together, it’s very difficult to do because everyone operates in their own very competitive environment,” says White. ”The owner of the supply chain must provide that forum, and give instruction for those communities to work together.”


Getting the most from your stretch wrap
How you apply your stretch wrap is more important than the thickness of the film

New rules for shipping to Canada
If adopted, wood packaging materials must meet ISPM 15 regulations for heat treatment before crossing borders

About the Author

Bob Trebilcock
Executive Editor

Bob Trebilcock, executive editor, has covered materials handling, technology and supply chain topics for Modern Materials Handling since 1984. More recently, Trebilcock became editorial director of Supply Chain Management Review. A graduate of Bowling Green State University, Trebilcock lives in Keene, NH. He can be reached at 603-357-0484.


Subscribe to Modern Materials Handling magazine

Subscribe today. It's FREE!
Find out what the world’s most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today!

Recent Entries

The relationships between third-party logistics (3PL) service providers and shippers are seeing ongoing developments due in large part to the continuing emergence and sophistication of omni-channel retailing. That was one of the key findings of The 19th Annual Third-Party Logistics Study, which was released by consultancy Capgemini Group, Penn State University, and Korn/Ferry International, a global talent advisory firm.

Annual survey illustrates optimism resulting from increasing profits.

Serving primarily China and Taiwan, Tailift produces 28,000 forklifts annually.

Industrial barcode label printers are the gold standard for effective use of barcode technology to improve accuracy, reduce costs, and increase productivity in warehousing operations. Accuracy, costs, and productivity are the top concerns of companies with warehouses. As customer demands for perfect orders increases industrial barcode printers can produce the right barcode for the right products. As material costs increase these printers ensure minimal labor and physical space are required. And to improve labor productivity industrial barcode printers use good data to produce the right labels at the right time and place to keep product moving.

PECO Pallet is investing in technology and aiming at customers further up the supply chain to extend its reach.



© Copyright 2013 Peerless Media LLC, a division of EH Publishing, Inc • 111 Speen Street, Ste 200, Framingham, MA 01701 USA