Conveyors and sortation: Turning up the volume
With intelligent circuit boards, dexterous handling and ultra-low maintenance, new technologies illustrate how what’s underneath the product can help a company stay on top.
in the NewsState of Logistics 2016: Pursue mutual benefit California’s ports may face new political pressures during “Peak Season” CEMA forecasts 7.5% growth in conveyor industry for 2017 Schneider National officially rolls out IPO U.S.-NAFTA freight up again in January, reports BTS More News
To meet the needs of the high velocity world of e-commerce, conveyors and sortation systems must be a smart, fast and efficient component of a production or order fulfillment engine. Driven by the need for flexibility, speed and maximum uptime, customers are turning to a new generation of technologies—and new ways to minimize and optimize conveyor and sortation solutions—that enable nimbleness while cutting costs.
“A successful warehouse now is about flow control and pulling levers at individual processes to keep the whole facility in balance,” says Lance Anderson, director of sales for sortation and distribution at Beumer Corp. “Going toward this sort of ‘flow control’ requires less conveyance and more flexible conveyor technologies that can re-route things in creative ways.”
E-commerce could reasonably be credited for the dismantling of conventional thinking about conveyors. When automated materials handling systems were first introduced years ago, they were a way to move things easier and faster without back-breaking labor. “Equipment got its start handling large items,” says Tim Kraus, product management supervisor for Intelligrated. “It’s now shifting to smaller orders, smaller items and piece handling instead of full cases. Conveyor and sortation designs have evolved to match this shift.”
But the evolution of conveyors extends beyond the multi-channel paradigm. Product tracking and visibility is becoming essential to many operations, and the pressure to do more in less space is universal. Conveyors therefore must be intelligent, more reliable and less maintenance-intensive—all while collecting data about product movement at every opportunity. Trends in packaging such as the increased use of poly bags can also challenge conventional conveyors, even as new solutions allow for the effective handling of a wider variety of materials.
Similarly, sortation technologies have traditionally worked best with predictable packaging in large volumes. But as everyone from Amazon to Mom and Pop work to achieve speed, efficiency and visibility, sortation solutions become more scalable, reliable and flexible. And since downtime is not an option, new sortation systems are built with redundancy and ease of reconfiguration in mind.
“I see the industry, with e-commerce and parcel handling, going toward lots of smaller, single-line orders,” says Mitch Johnson, director of systems development for Hytrol. “It’s changing the way we think about sortation. We used to think about sorting faster and in higher quantities. Now, it’s better to be able to sort smaller things and greater numbers of orders.”
The conveyor industry is seeing an increased interest in 24-volt or motor-driven roller technologies according to Johnson, who says 24-volt systems are now Hytrol’s No. 1 product. Unlike traditional conveyor, these new modular systems don’t rely on centralized, hardwired controls to direct the system components. Instead, the intelligence driving each conveyor segment is distributed throughout the facility. Paired with intelligent software, these technologies allow smart routing, energy efficiency and the ability to easily rearrange modules or sections of conveyors and sorters with minimal disruption.
“Each 24-volt motor has a circuit board with embedded intelligence,” says Johnson. “Each conveyor segment can look at upstream and downstream traffic, communicate with other segments, make decisions on the fly or send detailed information to management. The more we can move the brains from a distant location to a very specific location, that’s a direct increase in flexibility.”
A brainy circuit board might be located every 30 inches or 10 feet, depending on the application, and decisions are made on the conveyor rather than 500 feet away on a panel. Each segment can then adjust speed, monitor the movement of label-free product or activate diverts. This modular approach enables easy installation and reconfiguration as well as more targeted diagnostics; management can respond to precise areas if problems arise, and the intelligence of each motor can provide proactive information about wear rates or other potential issues.
Intelligent circuit boards at each section of the conveyor or sorter also send data back to the equipment supplier, who can remotely monitor wear indicators to reduce unplanned downtime. The ability to monitor the overall flow of a facility in real time is also a powerful tool for efficiency and uptime, according to Ken Lento, strategic business unit manager for unique products at FlexLink.
“People will say they achieved 85% efficiency in production and consider it a victory,” says Lento. “But they can’t explain why they lost the 15% because they’re not gathering the data. Now, they can start to analyze when and why a conveyor was down and how long it took to reset. They can respond and react in real time instead of looking at a report the day after.”
The management of real-time, case-level data throughout a warehouse is driving the development of mobile solutions for managers, according to Mike Khodl, vice president of solution development for Dematic. For example, a manager can use a mobile app to see if voice-enabled pickers are meeting standard rates, while another screen can illustrate sortation rates, conveyor status and overall productivity. “They can remotely see the flow of a system,” says Khodl. “Traditionally, they might focus a lot on the physical flow, but not on the data flow that goes with it. Now they are one and the same.”
Sorting it all out
When people think of sortation systems, many envision a massive 600-foot linear shipping sorter with dozens of inducts and destinations. Just as with conveyors, says Khodl, the tendency now is to work with point-solution sortation systems. “Maybe you want a divert point for a replenishment process or inside of a pick module,” Khodl says. “You now have the ability to drop a modular sorter component into a standard conveyor in an hour or two. In the past you couldn’t do that without open-heart surgery.”
In the midst of the e-commerce boom, unit sortation systems designed to handle eaches are more common. Whatever the size of the sorter, this equipment plays a critical role in speedy, intelligent product movement. In a flow-based facility, any downtime of any step in the process will disrupt the entire fulfillment engine. Therefore, sorters are increasingly geared toward scalability, redundancy and ease of maintenance.
Scalability is essential when working to cost-justify a sortation system that will meet peak seasonal demand while scaling back for the remainder of the year. During peak volumes, the sorter might direct totes to temporary stations with specific packaging or value-added specialties. “Off-peak, one order might go to a multipurpose station where it is packed to an outbound shipper right there,” Anderson says. “That’s one touch instead of three. That sort of flexibility is one of the ways to justify this capital equipment. Putting in a sorter that extends the life of a building is never as expensive as a new building or a third party.”
On the induction side, sorters can get bogged down when workers are paired one-to-one with inducts. The first person in line will always have an empty tray, whereas the fifth person might have to wait for an opening. Instead, five workers could continuously induct into short segments of conveyor that feed the sorter continuously, ensuring a balanced workload and optimal use of sorter locations. If fully automatic induction is not viable, this semi-automatic approach to induction is gaining popularity, according to Stephen Cwiak, vice president and general sales manager for Interroll.
On the discharge side, sorters might feature double- or triple-level destinations that transition between batches. Between the sorter and the packer, a divider door stops product from flowing down until the order is ready. This also ensures a steady workload while taking up less space by stacking orders vertically instead of linearly. “What tends to be forgotten is how many cases per hour you can induct and how many you can close,” says Steve Schwietert, vice president of integrated systems sales for TGW Systems. “Closing is the choke point, and can drop rates from 1,000 cases per hour to 500.”
To further minimize downtime, two sortation loops might be layered on top of one another, says Cwiak. This also addresses issues of SKU proliferation, as one sorter might be designed for larger, heavier items while a second handles smaller items. Or, one could handle fulfillment while the other handles returns. If either goes down for any reason, the second sorter can take up the slack, providing redundancy and continuity of operations. Additionally, new sorter systems allow for quick repairs to individual trays or belts even as the rest of the system continues to operate.
Handling whatever may come
With the intelligence and flexibility to react to changing volumes, conveyor and sortation solutions must also adapt to changing product characteristics. Piece handling lacks the predictability of cases, and can be difficult or impossible to manage with conventional conveyor systems.
“The industry is reaching out to things previously considered non-conveyable,” says Johnson. “Cartons are a cinch, but bags of dog food or grass seed, for instance, have been a problem in the past. The more you can convey those things, the better the return on investment.”
This might include the deployment of specialized conveyor zones for certain product types, a process made easier by modular systems. Non-rigid items like poly bags or envelopes also prefer more continuous conveyance surfaces to prevent jams, Cwiak says. Belts are therefore replacing rollers in certain applications.
New sensor technology must also work with conveyors to detect irregular items. “A carton’s front and back edges are easily and consistently detected,” says Intelligrated’s Kraus. “With something shaped like a pillow, you have to detect where it starts, ends and comes in contact with the rollers.”
Similarly, sortation technologies must allow for gravity in the case of light products sliding from tilt trays, or sensitive systems for the smooth discharge of light items from a cross-belt or sliding shoe sorter. “I have seen customers successfully adapt a sliding shoe sorter to sort poly bags, which was previously considered a recipe for disaster,” says Schwietert. “But people are starting to stretch the limit of what was thought of as a no-no.”
Maintenance is also a concern, says Johnson. “In the near future, each conveyor section might have a specific QR code label, which you could scan with a mobile app to pull up everything about the conveyor, or even order the parts right from there.”
Schwietert says 24-volt rollers tend to be easier to service, taking only five minutes to change as opposed to as much as an hour when working with a drive and reducer. He adds that in sortation systems it is now possible to add or move a divert without system downtime. “Say you have four diverts for UPS, and the next day you want to add four for FedEx. That doesn’t need to be disruptive.”
Another way to minimize disruption is to plan ahead. Traditional conveyors feature fixed guide rails, heights and widths. New systems—which can also be retrofitted to make use of existing conveyor—use adjustable guide rails to make for quick manual transitions or even software-directed automatic transitions. “In the past, if you wanted to switch products on a length of elevated conveyor, you would have to use a ladder, deactivate the equipment, and complete the change in a day or two,” says Lento. “Now you can go to a control panel and switch over an entire line in a matter of minutes.”
“A lot of customers ask for solutions based on what they’re doing today, just to get the line running,” Lento says. “It’s always more expensive to make changes later than to do it during the initial project. And who today knows what their packaging will look like in two years?”
Companies mentioned in this article
FlexLink Group: flexlink.com
TGW Systems: tgw-group.com
About the AuthorJosh Bond, Senior Editor Josh Bond is Senior Editor for Modern, and was formerly Modern’s lift truck columnist and associate editor. He has a degree in Journalism from Keene State College and has studied business management at Franklin Pierce University.
Subscribe to Modern Materials Handling Magazine!Subscribe today. It's FREE!
Find out what the world’s most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today!
Lawson Products: Automation that fits Lawson’s multi-purpose distribution center View More From this Issue