MMH    Topics     News

ISM manufacturing data sees a slight gain in April


Latest Material Handling News

A mixed bag may be the most appropriate way to characterize the current state of manufacturing based on the most recent edition of the April edition of the Manufacturing Report on Business issued by the Institute for Supply Management (ISM) today.

The PMI, the ISM’s index to measure growth, was flat compared to March at 51.5 (a PMI of 50 or greater represents growth), snapping a five-month stretch of sequential declines, which had been in effect since reaching 57.9 in October 2014. The PMI is 3.7 percent below its 12-month average of 55.2 and remains at its lowest level since checking in at 50.1 in May 2013.

The report noted that that economic activity in the manufacturing sector has grown for 28 straight months, while the overall economy has shown growth for the last 71 months.

Including the PMI, one of the report’s four key metrics was flat in April, with two seeing gains and one declining.

New orders, referred to as the engine that drives manufacturing, headed up 1.7 percent to 53.5, growing for the 29th consecutive month, and production saw a 2.2 percent uptick at 56.0, showing growth for the 32nd month in a row. Employment was the lone metric with a decrease, down 1.7 percent to 48.3, which is its lowest level since dropping to 47.8 in September 2009.

Of the 18 sectors reporting into the ISM, 15 reported growth in April.

Comments selected for the report submitted by ISM member respondents had a generally positive tone. A primary metals respondent noted that “production and orders remain strong and steady,” and a miscellaneous manufacturing respondent said that business conditions are good, with slowly rising demand. The impact of the West Coast port labor dispute appears to be intact, as a computer and electronics respondent explained that international shipments are still being delayed by the strikes at West Coast ports.

“There are lots of positives in this report,” said Brad Holcomb, chair of the ISM Manufacturing Survey Business Committee, in an interview. “Even with a flat PMI, I like this month’s better than March’s, because we have a broader spread of growth, with 15 industries reporting growth in April compared to ten in March. New orders also are up, with 11 companies reporting order growth compared to nine in March, and 13 citing production growth, ahead of nine in March.”

And even though employment was down in April, 11 sectors reported growth, whereas seven reported growth in March.

Holcomb said that the employment decline represents a bit of a pause in the action, with the first four months of the year being somewhat slower than expected on the employment front.

“We still have good employment levels and over the past few years there have only been a few excursions below 50 and then it comes right back up,” noted Holcomb. “If history repeats itself, we are going up from here.”

Correlating the current PMI levels with U.S. GDP, Holcomb said that from January through April, the average PMI of 52.4 corresponds to a 2.9 real increase in GDP, with April alone at 2.6 in real GDP.

Supplier deliveries in April slowed at a faster rate, falling 0.4 percent to 50.1, dealing with the aftereffects of the West Coast port slowdown, and inventories were flat at 49.5.


Article Topics

ISM
   All topics

News & Resources

Latest in Materials Handling

Registration open for Pack Expo International 2024
Walmart chooses Swisslog AS/RS and software for third milk processing facility
NetLogistik partners with Vuzix subsidiary Moviynt to offer mobility solutions for warehouses
Materials Handling Robotics: The new world of heterogeneous robotic integration
BSLBATT is looking for new distributors and resellers worldwide
Lucas Watson appointed CSO for Körber’s Parcel Logistics business in North America
Hyster recognizes Dealers of Distinction for 2023
More Materials Handling

About the Author

Jeff Berman's avatar
Jeff Berman
Jeff Berman is Group News Editor for Logistics Management, Modern Materials Handling, and Supply Chain Management Review and is a contributor to Robotics 24/7. Jeff works and lives in Cape Elizabeth, Maine, where he covers all aspects of the supply chain, logistics, freight transportation, and materials handling sectors on a daily basis.
Follow Modern Materials Handling on FaceBook

Subscribe to Materials Handling Magazine

Subscribe today!
Not a subscriber? Sign up today!
Subscribe today. It's FREE.
Find out what the world's most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today.

Latest Resources

Materials Handling Robotics: The new world of heterogeneous robotic integration
In this Special Digital Edition, the editorial staff of Modern curates the best robotics coverage over the past year to help track the evolution of this piping hot market.
Case study: Optimizing warehouse space, performance and sustainability
Optimize Parcel Packing to Reduce Costs
More resources

Latest Resources

2023 Automation Study: Usage & Implementation of Warehouse/DC Automation Solutions
2023 Automation Study: Usage & Implementation of Warehouse/DC Automation Solutions
This research was conducted by Peerless Research Group on behalf of Modern Materials Handling to assess usage and purchase intentions forautomation systems...
How Your Storage Practices Can Affect Your Pest Control Program
How Your Storage Practices Can Affect Your Pest Control Program
Discover how your storage practices could be affecting your pest control program and how to prevent pest infestations in your business. Join...

Warehousing Outlook 2023
Warehousing Outlook 2023
2023 is here, and so are new warehousing trends.
Extend the Life of Brownfield Warehouses
Extend the Life of Brownfield Warehouses
Today’s robotic and data-driven automation systems can minimize disruptions and improve the life and productivity of warehouse operations.
Power Supply in Overhead Cranes: Energy Chains vs. Festoons
Power Supply in Overhead Cranes: Energy Chains vs. Festoons
Download this white paper to learn more about how both systems compare.