JCPenney’s cross-dock center moves 165,000 cases a day

A new cross-dock center can move 165,000 cases a day from the receiving dock to the shipping dock with 99.9% accuracy.

By ·

JCPenney, Lathrop, Calif.

Size: 436,000 sq ft
Throughput: 165,000 cases per day capacity
Shifts: 2 shifts, 5 days
Employees: 100 employees

The shortest distance between two points is a straight line.

In many respects, that sums up the operations at JCPenney’s sixth US Retail Logistics Center (RLC), opened in July 2007 in Lathrop, Ca, not far from Oakland: Up to 95% of the cases received at the facility are cross-docked straight from the receiving dock to the shipping dock with just two touches in between: Once to unload them onto a conveyor at the receiving dock and once to load them into a trailer at the shipping dock. In between software and automated materials handling equipment handles the rest. And when that product is received at one of Penney’s 13 regional store support centers, in all likelihood it’s cross-docked again to a store.

“We’re able to process a carton in five to six minutes, depending on which door it’s coming out of and which doors it’s being sorted to on the outbound side,” says Tim Wood, Penney’s engineering and optimization director.

The 436,000 sq ft facility utilizes 20,000 feet of conveyor and a 938-foot long, single-unit sliding shoe sortation system (Dematic, to process 165,000 cartons per day through the facility, with 99.9% accuracy. The system is one of the longest single-unit sliding shoe sorters in the world.

The new system, however, is about more than speed. Several unique features optimize the utilization of the equipment inside the four walls of the RLC, including:

* Precision merge gapping allows the system to sort with 2 inches or less between cartons rather than the conventional 10 – to – 12 inches. That enables Penney to get more throughput from the same operating speeds as a conventional sortation system.

* The sortation system diverts cartons parallel to the sorter, rather than at an angle, again allowing for more throughput but also resulting in less damage to cartons.

* Air-cooled linear induction motors provide quieter, energy efficient sortation. 

Outside the four walls, the facility adds an extra layer of security to Penney’s supply chain by broadening the retailer’s cross-docking capabilities, and utilizing a second port. 

Building the better cross-dock center
Headquartered in Plano, Tx, with more than 1,100 department stores, over 150,000 associates, and $18.5 billion in revenue in 2008, JCPenney is one of the country’s leading retailers. Penney offers a wide array of national, private and exclusive brands which reflect the company’s commitment to providing customers with style and quality at a smart price. The company’s private brand retailing accounts for nearly 50% of its merchandise mix.

The Lathrop DC is one of six RLC’s in Penney’s distribution network. Ninety percent of the merchandise received at the RLC is from overseas in containers; the remaining 10% is from local suppliers in the area, which is merged in with the container merchandise at the RLC’s receiving docks. Merchandise cross-docked from the RLCs goes to one of thirteen regional Store Support Centers (SSC), each servicing 60 to 130 stores. When product arrives at one of the SSCs, it is once again cross-docked to an individual store. “We have been cross-docking for 30 years, and this new facility broadened our capabilities,” says Wood. “Only a small percentage of our merchandise goes into temporary storage.”

Planning for the new RLC began four to five years ago. Prior to the Lathrop DC, Penney received all West Coast container shipments at its Buena Park RLC in Southern California, arriving through the Port of Long Beach. That facility, as well as a third party logistics provider working with Penney in southern California, were stretched to their limits as the company grew internally, adding up to 50 new stores a year, and more merchandise arrived from overseas.

“We were struggling with capacity issues in our facility, and our 3PL’s operations were stretched across four or five buildings,” says Wood. “We wanted to bring all of that under one roof.”

In addition, Penney wanted to mitigate the risk to its supply chain. Rather than build a second facility in Southern California, the new DC was located in the Bay Area near Oakland. “That gave us port diversification,” says Wood. “If something should ever happen to shut down the port in Southern California, like an earthquake or a strike, we can still receive goods on the West Coast.”

The added capacity and port diversification also allowed Penney to process goods faster, reducing the overall transportation time for direct imports.

Once the decision was made to build, Penney set out two important criteria for the new facility:

First, it had to be able to handle at least 150,000 – 200,000 cartons per day over two shifts; in addition to installing the new equipment, the building needed to be modified with the addition of 8 feet to accommodate more shipping doors.

Second, it had to be built fast, within six months. “We had a very short time horizon because we wanted the facility up and running to handle peak season, which begins in August,” says Wood.

Penney secured a lease for an existing building in March, and the new DC went live in July.

Super sortation
With the focus squarely on cross-docking, the centerpiece of the new RLC is its high-speed sortation system.

“Since we were able to start with a Greenfield facility, we wanted a cross-dock system with more flexibility in the volume and throughputs because the volume goes up and down, depending on the time of year,” says Wood.

Central to that approach is that the system can constantly adjusting speeds based on: 

* How much volume is coming through this sub-system upstream of the merge;

* How much volume is coming off of the sorter;

* And how much volume is enroute from the pre-merge through the sorter.

“The system will automatically vary the speed as it sense more freight coming through the doors, or we can manually set the system to run at a certain number of cartons per minute if we know it’s a slow day, or a day with heavy volume,” says Wood. “Since there’s a correlation between operating speed and wear on the conveyor, this allows us to maximize our throughput while conserving energy and reducing the maintenance required on the system.”

The conveyors use belts exclusively, instead of rollers, which increases package control, and enables precision gapping and high-speed parallel-divert sliding shoe sortation.

Because the packages are closer together, the sorter can run at a slower speed, yet handle the same volume of packages that another sorter would handle having to run at a much faster speed – 20 percent higher speed to be exact. Consequently, Lathrop’s sorter can process the same number of cartons at 540 feet per minute (FPM) compared to the industry standard of 650 FPM, and with a more gentle handling because of the lower speeds.

Another important feature is the use of 50 linear induction motors distributed across the system. “Most conveyor systems have one big motor driving the system,” explains Wood. “Our system is designed to use a number of smaller motors so that even if we lose one or two, the system will continue to operate.” In the two years since the system went live, adds Wood, the facility has never had down time because of a motor issue.

Energy conservation, reduced maintenance, increased capacity, and port diversification. Put them together, and they add up to cross-docking success. “The DC performs exceptionally well,” says Wood. “After two years, we’ve had no difficulties and we’re serving our needs into the future.”

System Suppliers
System integrator, conveyor and sortation: Dematic,
Lift trucks: Crown Equipment Corp, 
WMS: RedPrairie, 
Overhead scanner & dimensioner: SICK, 

This article originally appeared in the October 2009 issue of Modern Materials Handling

Study explores crossdocking trends
Report indicates that more and more companies are finding value in the practice’s ability to take costs out of the system, manage inventory levels, increase efficiencies and accommodate unpredictable customer demand.

About the Author

Bob Trebilcock
Bob Trebilcock, editorial director, has covered materials handling, technology, logistics and supply chain topics for nearly 30 years. In addition to Supply Chain Management Review, he is also Executive Editor of Modern Materials Handling. A graduate of Bowling Green State University, Trebilcock lives in Keene, NH. He can be reached at 603-357-0484.

Subscribe to Modern Materials Handling Magazine!

Subscribe today. It's FREE!
Find out what the world’s most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today!

Article Topics

Automation · Best Practices · Conveyors · · All Topics
Latest Whitepaper
Capturing Labor, Space, and Accuracy Returns with AS/RS
Find out how the demand of e-commerce and digital age expectations are driving the need to automate material handling with AS/RS solutions to improve labor productivity, save space, and reduce costs associated with inaccurate picks
Download Today!
From the November 2017 Modern Materials Handling Issue
A new facility, iPhones and a new WMS allowed cookware manufacturer Lodge to double its business for the fourth time in 20 years and shorten order delivery time from 10 days to three.
10th Annual Salary Survey: The Price of Performance
Let’s put Automatic Data Capture (ADC) Technology to Work
View More From this Issue
Subscribe to Our Email Newsletter
Sign up today to receive our FREE, weekly email newsletter!
Latest Webcast
The State of the DC Voice Market
A lot has changed in the last 10 years, especially in voice technology. This webinar will cover the state of the voice market, review two leading voice solutions and help you gain a better understanding of the options and capabilities available today.
Register Today!
Lodge Manufacturing: Distribution Cast in Iron
A new facility, iPhones and a new WMS allowed cookware manufacturer Lodge to double its business for...
Rochester Drug Cooperative: Robots ready for work
It’s still early stages, but Rochester Drug Cooperative is proving that mobile robotic piece...

System Report: Pouch sorter powers Stage’s fulfillment needs
How a hometown department store chain transformed its e-fulfillment processes with pouch sortation...
Cubing and Weighing Equipment: Measure Up
The use of cubing and weighing equipment is growing beyond dimensional weight applications.