MMH    Topics     Lists    Special Reports

Lift Trucks: Top 20 lift truck suppliers, 2011

With sales on the rise for the second consecutive year, the worldwide industrial lift truck market is revved up.


Last year, Modern’s Top 20 lift truck suppliers story started on an upbeat note. It read: The worldwide industrial lift truck industry spent the better part of 2009 in a rut. Sales were down 39%, but it appears the worst may be over.

So, one year later, did we get it right? Not only did we hit the right note, we watched the lift truck industry take it even higher than expected. Last year when Modern spoke with Jeff Rufener, president of the Industrial Truck Association (ITA) and vice president of marketing for Mitsubishi Caterpillar Forklift of America, industry sales figures were up 40% over the same time period as the previous year. But he didn’t expect that rate to continue throughout 2010. Happily, Rufener admits he was wrong. That rate of increase held up, and North American distributors saw 2010 orders finish up 40% better than in 2009.

Hold on, though; Rufener still is cautious. He says business was good last year and is better than expected this year, but it’s still fragile.

One reason for the fragile condition is manufacturing. Manufacturing had been a bright spot in the economic recovery, says Rufener, but that has started to slow recently. Meanwhile, unemployment is above 9% and gas is hovering at $4 a gallon.

On the up side, one solid contributor to the lift truck industry’s annual growth is the fact that capital goods are a cyclical business. “Later on in 2010, we saw dealers rebuilding inventory and replenishing their rental fleets, which they hadn’t done in several years,” Rufener says. “This reflects increased customer demand and is a direct reflection of the economic activity dealers see in their territory and in their expectations for future growth.”

Back in black
So, the future looks good, but what about today? That’s also looking good, and the proof is in the numbers. According to ITA’s worldwide industrial truck figures, shipments were up 132% in 2010. (See the “Worldwide lift truck market” table.)

This is not just a North American phenomenon: Last year, shipments were up around the globe.

  • Asia experienced the biggest jump, with a 152% increase in shipments. The region went from a 23% decline in 2009 shipping 207,207 units to shipping 314,307 units in 2010.

  • Africa was right up there with an increase of 143%. After shipping 9,953 units in 2009 and experiencing a 40% decline, the African region shipped 14,243 units in 2010.

  • Europe shipped 245,512 units in 2010, which resulted in 119% increase after experiencing a decline of 48% in 2009.

  • The Americas also experienced a 119% increase in 2010 after a decline of 43% in 2009. The region shipped 152,160 units in 2010, compared to 128,246 in 2009.

  • Oceania also overcame a 48% decline. In 2009 the region shipped 12,451 units, compared to 14,468 units in 2010, resulting in a 116% increase.

In total, worldwide shipments rose from 561,939 in 2009 to 740,690 in 2010, an impressive 132% increase. With the numbers calculated and each of the worldwide regions performing well, the Top 20 lift truck suppliers also performed well independently.

The Top 10
The top suppliers are at the top of the list again this year and almost in the exact order. Last year’s leading suppliers­—Toyota, Kion, Jungheinrich, NACCO and Crown—continue to own the top five positions. (See the table for the complete list of suppliers.)

Toyota, which manufactures Toyota and Raymond brands, remains at No. 1 with $5.9 billion in revenue, up from $4.6 billion in 2009. The Kion Group, which includes North American brands Linde, Still, OM and Baoli, retains the No. 2 position with $4.67 billion in revenue, up from $4.1 billion.

Jungheinrich holds on firmly to the No 3. spot with $2.4 billion in revenue, up slightly from $2.3 billion in 2009. Crown and NACCO, which ranked in the No. 4 and No. 5 positions in 2009, respectively, both come in at $1.8 billion and share the No. 4 position. Crown saw an increase in revenue up from $1.6 billion, while NACCO, which includes North American brands Hyster and Yale, rose from $1.5 billion.

The five remaining top 10 lift truck suppliers are also back, with only a slight variation in the order. Rounding out the top 10 are Mitsubishi Caterpillar Forklift, back in No. 6 position; Komatsu, back in the No. 7 position; Nissan moving up one position to No. 8; TCM Corp. also moving up one position to No. 9; and Anhui Forklift Group dropping two positions to No. 10.

Changes in the line up
Absent from this year’s list is the French supplier Manitou. While the company has had a good year, its company spokesperson told Modern the company preferred to be removed from the list because it supplies mostly rough terrain vehicles and doesn’t compete with the majority of suppliers on this list.

New to the list this year is India’s Godrej & Boyce Manufacturing. In last year’s story, we suggested keeping an eye on the emerging lift truck market in India. This year it paid off for Godrej & Boyce Manufacturing as the company makes its first appearance on Modern’s Top 20 list in the No. 20 position with $67 million in revenue.

The BRIC market
India is one of the four countries that comprise what the lift truck industry refers to as BRIC, which is an acronym for the combined countries of Brazil, Russia, India and China. In 2010, BRIC’s lift truck market was up 84% over 2009, and through the first quarter of 2011, it was up 44% over 2010. According to Rufener, there are huge rates of growth in these emerging markets. And, of the four BRIC countries, Rufener says, China is dominant, accounting for about 80% of total demand.

In the coming months, we’ll keep an eye on the B in BRIC. Brazilian supplier Paletrans came close to making this year’s list, with $55 million in revenue.

Making the list
To make Modern’s Top 20 list this year, suppliers had to make at least $67 million in revenue in 2010. As a point of comparison, the cut off was $60 million in 2009 and $98 million in 2008.

The top five suppliers combined reported revenue of more than $16.6 billion; seven of the top 10 suppliers reported revenue in the billions, as opposed to five in the billions last year.

The combined 2010 revenue for all 20 companies on the list tops $24.17 billion, compared to $20.17 billion in 2009, $28.99 billion in 2008, and $31.67 billion in 2007. While the total isn’t back up to 2007 levels, the numbers are on the rise.

Going forward, going green
Also on the rise is the continued, ongoing interest in green technology, particularly the demand for electrics. “We’re seeing, and will continue to see, an increase in electrics,” says Rufener. “Even with strong economic recovery and dealer growth, electrics are still 60% of the mix and are expected to exceed that percentage sold in North America.”

According to Rufener, we’re seeing more companies embrace green technology simply for sake of being able to demonstrate a commitment to environment. “Companies are willing to spend money to go green and are not be driven solely by the cost-benefit analysis,” Rufener says. “Every application is different. While some prove it to be cost effective, others that aren’t so clear, but companies will go green for sake of environmental responsibility.”

How suppliers are ranked
To be eligible for Modern’s annual Top 20 lift truck suppliers ranking, companies must manufacture and sell lift trucks in at least one of the Industrial Truck Association’s (ITA) seven truck classes: electric motor rider; electric motor hand trucks; internal combustion engine; pneumatic tire; electric and internal combustion engine tow tractors; and rough terrain for lift trucks.

Rankings are based on worldwide revenue from powered industrial trucks during each company’s most recent fiscal year. Revenue figures submitted in foreign currency are calculated using the Dec. 31, 2010 exchange rate.


Article Topics

Features
Lists
Resources
Special Reports
Brazil
Crown Equipment
Forklifts
Hyster
Jungheinrich
KION
Lift Trucks
NACCO Materials Handling Group
Raymond
Special Report
Top 20
Toyota Material Handling
Yale Materials Handling
   All topics

Special Reports News & Resources

Automation/Retail Special Issue: Savvy users embrace change
Research Report: Use of Automation in Warehouse/DC
Special Digital Issue: Warehouse/DC Robotics
System Report: Building the world’s best warehouse
Top 20 Warehouses 2019
Top 20 automatic identification and data capture suppliers 2019
Top 20 Lift Truck Suppliers in 2019: Market reaches new heights
More Special Reports

Latest in Materials Handling

ASME Foundation wins grant for technical workforce development
The (Not So) Secret Weapons: How Key Cabinets and Asset Management Lockers Are Changing Supply Chain Operations
MODEX C-Suite Interview with Harold Vanasse: The perfect blend of automation and sustainability
Consultant and industry leader John M. Hill passes on at age 86
Registration open for Pack Expo International 2024
Walmart chooses Swisslog AS/RS and software for third milk processing facility
NetLogistik partners with Vuzix subsidiary Moviynt to offer mobility solutions for warehouses
More Materials Handling

About the Author

Lorie King Rogers's avatar
Lorie King Rogers
Lorie King Rogers, associate editor, joined Modern in 2009 after working as a freelance writer for the Casebook issue and show daily at tradeshows. A graduate of Emerson College, she has also worked as an editor on Stock Car Racing Magazine.
Follow Modern Materials Handling on FaceBook

Subscribe to Materials Handling Magazine

Subscribe today!
Not a subscriber? Sign up today!
Subscribe today. It's FREE.
Find out what the world's most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today.

Latest Resources

Materials Handling Robotics: The new world of heterogeneous robotic integration
In this Special Digital Edition, the editorial staff of Modern curates the best robotics coverage over the past year to help track the evolution of this piping hot market.
Case study: Optimizing warehouse space, performance and sustainability
Optimize Parcel Packing to Reduce Costs
More resources

Latest Resources

2023 Automation Study: Usage & Implementation of Warehouse/DC Automation Solutions
2023 Automation Study: Usage & Implementation of Warehouse/DC Automation Solutions
This research was conducted by Peerless Research Group on behalf of Modern Materials Handling to assess usage and purchase intentions forautomation systems...
How Your Storage Practices Can Affect Your Pest Control Program
How Your Storage Practices Can Affect Your Pest Control Program
Discover how your storage practices could be affecting your pest control program and how to prevent pest infestations in your business. Join...

Warehousing Outlook 2023
Warehousing Outlook 2023
2023 is here, and so are new warehousing trends.
Extend the Life of Brownfield Warehouses
Extend the Life of Brownfield Warehouses
Today’s robotic and data-driven automation systems can minimize disruptions and improve the life and productivity of warehouse operations.
Power Supply in Overhead Cranes: Energy Chains vs. Festoons
Power Supply in Overhead Cranes: Energy Chains vs. Festoons
Download this white paper to learn more about how both systems compare.