Materials handling clockspeed

Innovation, new business models and new alliances were on display at Promat. It’s a whole new world.

By ·

Clockspeed. If you’re not familiar with the term, it was coined by Charles Fine, an MIT professor, to define rapidly evolving industries – those with a fast clock speed that he likened to fruit flies that are born, mature and expire in a very short time. He argued that “in business today, all advantage is temporary. In order to survive-let alone thrive-companies must be able to anticipate and adapt to change, or face rapid, brutal extinction.“ 

Based on my week at Promat in Chicago, I’d argue that the clockspeed of our industry has been accelerating in an unprecedented fashion over the last three to five years. As one industry veteran put it the other day, there was a ten-year period where we more or less saw many of the same products and solutions at show after show.  Achievements were often a measure of speeds and feeds – the rate at which the equipment could move materials through a DC. This Promat, I had more conversations about algorithms and software, like the one I had with Dematic, than about the mechanical functionality of the equipment.  At the 30,000 foot level, I break the industry developments down into three bullets.

New alliances: The biggest news in the last year of the industry has been the mergers and acquisitions of Retrotech, Egemin and Dematic by Kion; Intelligrated by Honeywell; and Toyota’s acquisition of Bastian and Vanderlande. But it doesn’t stop there. Yesterday’s Wall Street Journal reported that “Plug Power granted Amazon the right to buy up to 20 percent of its shares” based on meeting contract goals. While Kion, Intelligrated and Toyota are taking different approaches to the market, in conversations with their executives, they each predicted an increase in R&D spending that will benefit their individual companies but also the industry – and increase the clockspeed.

New business models: The traditional industry business model is that a company builds a DC and then buys, installs, operates and maintains solutions provided by equipment, technology and software suppliers.  These are still emerging, but we’re beginning to see solution providers turning that traditional model on its head. Witron, for instance, is installing and operating its systems for some customers; Packsize   owns its machines in many facilities and charges by the amount of corrugated used; CHEP has evolved from just renting pallets to monetizing the information it collects about its customer’s supply chains; Tompkins International announced Monarchfx, its e-comm fulfillment alliance, and for some time Dematic, has operated facilities for a heavy equipment manufacturer.

New solutions: Let’s end with new solutions, which is where we have really seen a change in clockspeed. Despite spending more than 30 years in this industry, I am still wonderstruck when I walk the show floor and see how concepts like goods-to-person picking are still being interpreted for specific applications by companies like Kardex Remstar and Cimcorp; and at how shuttles and AutoStore came seemingly out of nowhere to take over a market that was once dominated by horizontal carousels and mini-load systems. Similarly, the cool factor at this year’s event was the adaption of augmented and virtual reality technologies to everything from lift truck operator training at Raymond to piece picking at Bastian. They still have a bit of a science project/pilot feel about them, but watching the demonstrations, you can’t help but feel that someone is going to figure out a way to increase productivity with these new technologies down the road. Perhaps the best example of the clockspeed phenomenon was robotics exhibitors like IAM Robotics, RightHand Robotics, Locus Robotics and OTTO Motors – I know I’m leaving some out, but those were the four I had a chance to visit. What’s exciting about this space, as Jeff Hedges, the president of OPEX, put it, is that many of these companies are from outside the materials handling industry. As a result, they may bring a new perspective to age old problems, that will increase the clockspeed even more. 


About the Author

Bob Trebilcock
Bob Trebilcock, editorial director, has covered materials handling, technology, logistics and supply chain topics for nearly 30 years. In addition to Supply Chain Management Review, he is also Executive Editor of Modern Materials Handling. A graduate of Bowling Green State University, Trebilcock lives in Keene, NH. He can be reached at 603-357-0484.

Subscribe to Modern Materials Handling Magazine!

Subscribe today. It's FREE!
Find out what the world’s most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today!

Article Topics

Clockspeed · Innovation · ProMat 2017 · · All Topics
Latest Whitepaper
Corrugated Boxes Deliver for E-Commerce
Corrugated box can and should be thought of as one of the key technologies for e-commerce-era fulfillment.
Download Today!
From the January 2018 Modern Materials Handling Issue
PFS built one of the largest and most automated AS/RS freezers in the world in Washington state. Next up is a new design for automation. Automated Storage/ Automated Retrieval System, Cold Storage.
Lift Truck Series Part 1: Lift truck technology connects pickers to productivity
Breaking Through On Yard Visibility
View More From this Issue
Subscribe to Our Email Newsletter
Sign up today to receive our FREE, weekly email newsletter!
Latest Webcast
Emerging Technologies for Your Distribution Center
Come get an insider's view of the latest technologies for inside your Distribution Center. You'll learn which technologies are being piloted, which are having success and moving from concept to implementation and into production on the maturity scale, and what's coming on the horizon.
Register Today!
EDITORS' PICKS
Trinchero Family Estates: Pallet handling in the vineyard
The second-largest family-owned wine company in the world turns to automated pallet handling and...
System Report: Rocky Brands Sees the Light
Confronting an aging materials handling system and new channels of business with new customer...

Top 20 industrial lift truck suppliers, 2017
The top lift truck suppliers list is changing with industry acquisitions causing a dramatic...
Lodge Manufacturing: Distribution Cast in Iron
In a new facility, iPhones and a new WMS allowed cookware manufacturer Lodge to double its business...