Success at Pack Expo goes beyond the numbers

Increases in attendance and the number of exhibiting companies only add to the real successes and value of PACK EXPO International 2012.

By ·

PACK EXPO International 2012 (McCormick Place, Chicago; Oct. 28–31) recorded more than 1.12 million net square feet of exhibit space and 1,965 exhibiting companies. Registration points towards a 3 percent increase in attendance over 2010. By all measures, the numbers added up to PACK EXPO’s strongest Chicago event since 2006, according to show owner and producer PMMI.

“All of our measurements increased as compared to 2010,” says Jim Pittas, vice president, Trade Shows, PMMI. “Pre-show registration was up nearly 10 percent, and we sold out of booth space back in July.”

Pittas adds that attendance patterns held consistent with years past, despite travel difficulties resulting from Hurricane Sandy. Fewer than 5 percent of pre-registrations were from areas hit hardest by the storm.

The numbers only tell part of the story, however. The activity in the exposition hall made the show a qualitative, as well as a quantitative, success.

Attendees had more chances than ever to delve deep into their specific industries as PACK EXPO expanded its customer-centric approach. The show featured five pavilions for exhibitors serving specific markets: The Processing Zone, The Pharmaceutical Pavilion, The Reusable Packaging Pavilion, The Confectionery Pavilion and The Brand Zone.

“The pavilion structure works in concert with My PACK EXPO, the PACK EXPO app, keyword searches on and the Pre-Selects printed guides to exhibitors in various categories, to make navigating PACK EXPO easier and more efficient,” says Pittas. “It’s all in support of our primary goal: to serve our customers — the attendees.”

The “vertical lounges” added a new dimension to the effort in Chicago. These networking-oriented show floor lounges expanded from their 2012 debut in Las Vegas —PACK EXPO introduced The Beverage Cooler lounge and reprise The Candy Bar lounge, The Rx Lounge and The Baking-Snack Break lounge. A visit to a vertical lounge meant connecting with attendees and exhibitors in the same market and access to an “Ask the Expert” feature staffed by leaders from partner trade associations. Receptions held at the close of Day Two (Oct. 29) amplified the networking opportunities even further.

Pittas adds, “Their success was a direct result of our partnerships with leading trade associations and exhibiting companies. By working with our partners, we were able to directly address their members’ and customers’ needs.”

Deepening Understanding
The importance of education in any format cannot be underestimated, and PACK EXPO International was packed with plenty of opportunities to learn. In the most traditional sense, that started with The Conference at PACK EXPO, sponsored by DuPont.

As they were for the customer-centric features on the show floor, partnerships were key to the success of the Conference, which featured sessions from the Alliance for Innovation and Operational Excellence (AIOE); Association for Automatic Identification and Mobility (AIM); the Institute of Packaging Professionals (IoPP); the Great Lakes and Midwest chapters of the International Society for Pharmaceutical Engineering (ISPE); the International Society of Beverage Technologists (ISBT); PMMI U; Reusable Packaging Association (RPA) and The Packaging Association — PAC

Under the umbrella theme, “Educate, Innovate, Advance,” sessions were organized in tracks that paralleled the other customer-centric features of the show: Beverage; Focus on the Future – Trends and Innovations; Food Safety/Product Security; Manufacturing Solutions; Pharmaceutical and Medical Device; Sustainability/Packaging Materials; Track and Trace; and Transportation and Logistics.

“We turned to leading trade associations to create programming of value to their members,” says Maria Ferrante, vice president, education & workforce development, PMMI. “It’s a very effective model that helps us meet the attendees’ needs.”

The educational opportunities spilled out onto the show floor, too, where PACK EXPO attendees enjoyed the opportunity to ask questions and learn about new products in PACK EXPO’s Innovation Stage theatre. Innovation Stage hosted 30-minute presentations from 17 exhibitors over the course of the four days.

“The Innovation Stage presentations gave attendees the chance to get an in-depth explanation of new technologies. Judging by the number of people I saw there regularly, I’d say the attendees found these free educational sessions to be of value,” Pittas says.

Innovation Stage was just one of several sites for education on the show floor. In The Brand Zone, for example, Mintel and Material ConneXion presented their own daily schedules of presentations.

At the Mintel booth, presentations focused on data relating to specific consumer market segments, and displays spotlighted research and data the firm provides to address the food, beverage, retail and cosmetic/personal care sectors. Attendees left with new insight — the kind that’s integral to create compelling products.

“The Brand Zone brings together new ideas, materials and containers to shape winning brands, and having Mintel and Material ConneXion there was key to achieving that goal. With data and new ideas, both groups sparked insights attendees will use to develop new products and packaging, fuel innovation and establish stronger bonds with consumers,” Pittas says.

Material ConneXion set up shop within PACK EXPO’s annual display of award-winning packages from around the world, The Showcase of Packaging Innovations™, sponsored by the Dow Chemical Company. The group, which offers its members access to a 6,500-item library, brought a sampling of the materials in its library — many of which are not commonly used in packaging — for hands-on assessments by visitors with the goal of cross pollination of ideas.

As they made their way to The Brand Zone, visitors got an eyeful from the student researchers of Clemson University and their exhibit, “Clemson University Presents: The Packaging Test Track,” sponsored by Esko. The booth grew out of Clemson’s booth at PACK EXPO Las Vegas 2011, examining the visual and cognitive effects of packaging and their impacts on consumer purchases.

The PACK EXPO Lecture Series was the icing on the cake, featuring political pundits Dennis Miller and James Carville in a spirited discussion about the 2012 presidential election.

Teach Our Students Well
PMMI has an unflagging commitment to education and workforce development, and with the help of the PMMI Education and Training Foundation provided travel scholarships to 170 students and instructors coming out to PACK EXPO. But that’s not all. PACK EXPO exhibitors and PMMI volunteers and staff saw to it that the students were engaged, too. Tours of the show, led by PMMI past chairmen, gave students the benefit of the industry veterans’ first-hand knowledge.

And then there were the competitions.

B&R Industrial Automation sponsored the fourth annual PMMI Student Packaging Contest, which challenged students to come up with a food-safety compliant weighing, bagging and case-packing solution for a fictional snack food manufacturer. In their quest, the students experienced the strength of PACK EXPO, reasearching solutions and interacting with leading manufacturers.

First place ($4,000 in scholarship funds, shared among team members) went to the University of Florida team —students Gaby Cruz, Colleen Delaney, Michael Grandinetti and Alex Tipton (advisor Dr. Bruce Welt). The University of Wisconsin — Stout team received second place, sharing $2,000 in scholarship funds, as third-place winner, Cal Poly State University, shares $1,000 in scholarship funds. The other participating schools were Purdue University at Calumet; Rutgers University; San Jose State University; and Conestoga College.

Marc Ostertag, CEO of sponsor B&R, presented the winners during the Packaging Hall of Fame Reception and Induction Ceremony. The announcement juxtaposed these up-and-coming packaging leaders with recipients of the most prestigious honor in packaging. The Packaging Hall of Fame Class of 2012 is: Curtis Babb, MillerCoors (retired); Thomas Brady, Plastic Technologies, Inc. (PTI); Thomas Dunn, Flexpacknology LLC; Fred Hayes, Hayes & Associates Inc.; Hershey and Bernie Lerner, Automated Packaging Systems; and Nick Wilson, Morrison Container Handling Solutions.

On a lighter, and equally competitive, note the Amazing Packaging Race sent student teams to the four corners of the exposition to earn points by completing challenge tasks at any of the nearly 30 participating exhibitors.

The winning team — Alexandra Hills, Rochester Institute of Technology; Florin Mustata, Purdue University — Calumet; Stephen Suba, San Jose State University, and Dillon Quist, Wisconsin Indianhead Technical College — received the grand prize, an Apple iPad for each team member. ASCO Numatics sponsored The Amazing Packaging Race for the second year. By assigning teams without regard to school affiliation, PMMI gave students an opportunity to network with peers from other programs.

PACK EXPO also introduced high school robotics teams from the 2012 FIRST Robotics competition to the show.

The students demonstrated the robots they conceived, designed and built for the 2012 contest at the “Future Innovators — Robotics Showcase,” sponsored by Massman Automation Designs LLC and Siemens. It was another PACK EXPO “first,” and launched a PMMI initiative to expose high school students to packaging and processing as potential career choices.

Education & Workforce Development Committee Chairman Jeff Bigger, president and owner of Massman Automation, sees more than one benefit to the program, which launches a new PMMI initiative to reach out to high school students to expose them to packaging and processing as a potential career choice.

“To keep our industry strong, we need to continuously bring in fresh ideas and thinking – and high school is a perfect place to start. There’s so much room for innovation and problem-solving in the packaging and processing area, and these students are the best in the country at doing just that,” Bigger says.

Dorner Mfg., Flexicell, the Packaging Machinery Manufacturers Consortium (Aagard, Douglas, ITW Heartland and Massman) and Pearson Packaging Systems supported student teams from their local areas. Image: FIRST Robotics

Next Year: Las Vegas
Exhibitor booths were busy throughout the show, as exhibitors and clients or potential clients discussed real projects and exhibitors went back to the office with solid leads.

“PACK EXPO International 2012 was definitely a success,” says Yuska. “Traffic was strong, despite the storm, and the exhibitors I spoke with were very pleased with the number and quality of leads they received.”

The momentum continues. Exhibitors are already planning their presence at PACK EXPO Las Vegas 2013 (Las Vegas Convention Center, Sept. 23-25). Approximately 47,000 square feet of booth space was sold during the show in Chicago, pushing current PACK EXPO Las Vegas space sales to over 560,000 net square feet, more than 20 percent ahead of pace from 2011.

Yuska adds, “I think it’s significant that so many exhibitors have already begun planning and reserving booth space for PACK EXPO Las Vegas 2013. Any company that commits to exhibit has to believe they’ll receive a solid return on their investment of time and resources. So the exhibit sales to date speak volumes about the quality of business that was accomplished in Chicago. They’re an excellent indicator for success at PACK EXPO Las Vegas 2013 and that business remains on the upswing.”

Subscribe to Modern Materials Handling Magazine!

Subscribe today. It's FREE!
Find out what the world’s most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today!

Article Topics

Pack Expo · Packaging · PMMI · · All Topics
Latest Whitepaper
Sorting Out Your Sortation Options
Guiding you through the process of evaluating and selecting the right “mission-critical” sortation solution
Download Today!
From the April 2017 Issue
How does a fastgrowing, e-commerce startup company build out order fulfillment capabilities? Thrive Market answered that question with its new facility in Indiana.
2017 Warehouse/DC Equipment Survey: Investment up as service pressures rise
Putaway 101: Everything in its Place
View More From this Issue
Subscribe to Our Email Newsletter
Sign up today to receive our FREE, weekly email newsletter!
Latest Webcast
2016 Warehouse/DC Operations Webcast: Confronting omni-channel complexity
During this webcast we’ll examine the current activities, trends, and best practices in warehouse and DC operations management and how companies plan to address complex issues associate with omni-channel fulfillment.
Register Today!
ProMat closes: Make your plans for Modex 2018
With a record number of exhibitors and attendees seen at ProMat 2017, MHI anticipates more of the...
Keynote: Magic is the result of over-preparation and over-delivering to customers
During his keynote presentation Wednesday afternoon, Earvin “Magic” Johnson told a packed...

Keynote panel confirms digital supply chain shift seen in new MHI study
Wednesday’s keynote panelists agreed it is time to embrace the shift to digital supply chains seen...
MHI to honor original products, solutions with 5th-annual Innovation Awards
On Wednesday, during MHI Industry Night with Dana Carvey, the winners of the 5th-annual MHI...