Lift Truck Tips: Do more with less; lift trucks and attachments

Lift truck attachments are helping operators and operations make up for lost capacity and helping avoid upgrades
image

Aldi runs its entire freezer operation with
one lift truck and a layer picker attachment.

By Tom Andel, Contributing editor
March 01, 2010 - MMH Editorial

Perhaps the greatest lesson the recession of 2009 taught survivors is how to do more with less. That lesson is well represented in the lift truck world by how companies use the latest lift trucks and attachments.

For example, a couple years ago the in-freezer picking operation at Aldi Foods’ Center Valley, Pa., distribution facility employed a few manual order pickers operating electric pallet trucks. Toyota Industrial Lift Truck Company (TILT), the grocery distributor’s lift truck dealer, saw what was going on and demonstrated to Aldi’s management that its entire freezer operation could be run using one electric lift truck and a layer picker attachment (Cascade Corp., 503-669-6300, http://www.cascorp.com)).

Doing more with more is over. Today, lift trucks are more finely tuned to their capacity rating. Don’t expect a 5,000 pound truck to do the work of a 7,000 pound truck. That said, attachments are being designed to help lift trucks make up for any lost capacity.

Brad Vandehey, product manager for Cascade, a leading attachment provider, told me that some of the newer rotators are designed to maximize the capacity of heart-of-the-line 5,000-pound lift trucks. The weight of the attachment can be reduced by hundreds of pounds because it can be mounted closer to the carriage and has a smaller gear mechanism while enhancing speed and visibility. A lighter attachment means improved lift truck capacity.

“This may in some circumstances prevent the user from having to upgrade to a larger more expensive Class III 6,000-pound truck,” Vandehey says.

Attachments are also coming with new hydraulics to minimize driver input into clamp force control. With clamps, one of the most challenging aspects is adjusting the appropriate force to a load. Now that’s becoming an automatic feature on clamp systems. Now they can sense the amount of hydraulic pressure in the hoist system, interpret this information, and set the clamp pressure without driver input.

Even the B 56 industrial truck standard is changing, to reflect improvements in attachment safety. B 56.1, section 7.25.7 states: “The manual operation or physical action of the control used to release a load bearing clamp shall require two distinct motions or operations by the operator before the clamp is opened and the load bearing force is released.”

As a result, attachment providers are offering products requiring two actions (a button push and handle movement) to prevent the driver from accidentally moving the clamp open handle and dropping the load when it is lifted.

Lift trucks and their attachments are great examples of the teamwork required to do more with less in these tough economic times.

Contact Tom Andel at .(JavaScript must be enabled to view this email address).



About the Author

image
Tom Andel
Contributing editor

Subscribe to Modern Materials Handling magazine

Subscribe today. It's FREE!
Find out what the world's most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today!

Recent Entries

Supply chain visibility is the Holy Grail for warehouses and distribution centers where the fast and efficient movement of goods is the solution to satisfying customer demand. This is especially true for the 68% of companies which are not satisfied with material movement efficiency from source to destination. These companies are seeking new ways to get the right goods to the right place at the right time. They are finding that change, complexity, compliance, competition, and connectivity are leading to further confusion.

Instead of ignoring a forklift fleet and its associated costs, asking the right questions can lead to substantial savings.

This white paper outlines five ways to increase profits with automation. By implementing automated storage and retrieval equipment-such as horizontal carousels, vertical carousels and vertical lift modules, multiple areas of a manufacturing or distribution facility will benefit from savings in inventory accessibility, floor space, time, improved ergonomics and better accuracy.

Citing difficult winter weather, executives anticipate the release of pent-up demand.

First edition takes place in Nairobi, Kenya, Sept. 9-12, 2014.

Comments

Post a comment
Commenting is not available in this channel entry.


© Copyright 2013 Peerless Media LLC, a division of EH Publishing, Inc • 111 Speen Street, Ste 200, Framingham, MA 01701 USA