MMH    Topics 

ISM reports strong manufacturing growth in December


Keeping in line with its strong momentum in the manufacturing sector gleaned from previous reports, the Institute of Supply Management (ISM) reported that the manufacturing sector remained on a growth path in December.

The ISM’s Manufacturing Report on Business stated that the index the ISM uses to measure the manufacturing sector—also known as the PMI—was 57.0 percent in December, which was 0.4 percent higher than November. Any reading that is 50 or better represents economic growth, and November represents the 17th consecutive month that the PMI is more than 50, along with the fact that the overall economy has been on a growth track for 20 straight months.

“The manufacturing sector continued its growth trend as indicated by this month’s report,” said Norbert J. Ore, CPSM, C.P.M., chair of the Institute for Supply Management Manufacturing Business Survey Committee, in a statement. “We saw significant recovery for much of the U.S. manufacturing sector in 2010. The recovery centered on strength in autos, metals, food, machinery, computers and electronics, while those industries tied primarily to housing continue to struggle. Additionally, manufacturers that export have benefitted from both global demand and the weaker dollar. December’s strong readings in new orders and production, combined with positive comments from the panel, should create momentum as we go into the first quarter of 2011.”

Some of the notable PMI readings from the December report include: New Orders at 60.9 percent (up 4.3 percent from November); Production at 60.7 percent (up 5.7 percent from November); Employment at 55.7 percent (down 1.8 percent from November); Inventories at 51.8 percent (down 4.9 percent from November); Backlog of Orders at 47.0 percent (up 1.0 percent from November); and Prices at 72.5 percent (up 3.0 percent from October).

In an interview, Ore said it is encouraging to see 17 straight months of manufacturing growth, and he noted that 2010 will go down as a very good year for manufacturing, with the overall 2010 manufacturing index coming in at 57.3.

“The best thing about the manufacturing outlook right now is that with New Orders above 60 and Production also above 60, it seems to signal that the first quarter of 2011 is going to hold up quite well,” said Ore. “With these levels intact, solid manufacturing growth is sustainable.”

Over the last two months, New Orders and Production have fallen more in line with each other, with a large spread between the two not typical unless something very negative or very positive is taking place, he said. And prior to November, Production was growing significantly faster than New Orders, which was a concern at that time. New Orders typically over time averages 0.3 of a point more than Production, and it usually leads Production, according to Ore.

Looking at inventories, the ISM report noted that Inventories were down nearly 5 percent at 51.8, and Customers; Inventories were off by 5.5 percent in December at 40.0.

Ore said there has been a remarkable period in the last year, where the destocking cycle was quite extended, followed by a significant re-stocking period that has yet to catch up.

“The operative thought process, with Inventories dropping to 51.8 is that there is marginally an increase in December over November but not at the same rate as what occurred in November,” he said. “It tells me inventories are becoming balanced, although we are not there yet. And Customer Inventories falling would indicate we are not there yet in terms of balancing of inventories, but it will start to slow in the first quarter in my opinion and we will see some catch-up. Anecdotally, I am hearing from a number of [shippers] that they still have not caught up on their inventories. They had lowered inventories so significantly and then demand picked up. When they tried to rebuild inventories, demand picked up significantly and they were running the demand more than they were able to catch up on inventory.”


Article Topics

News
Institute for Supply Management
Inventory
ISM
Manufacturing
PMI
   All topics

Latest in Materials Handling

Registration open for Pack Expo International 2024
Walmart chooses Swisslog AS/RS and software for third milk processing facility
NetLogistik partners with Vuzix subsidiary Moviynt to offer mobility solutions for warehouses
Materials Handling Robotics: The new world of heterogeneous robotic integration
BSLBATT is looking for new distributors and resellers worldwide
Lucas Watson appointed CSO for Körber’s Parcel Logistics business in North America
Hyster recognizes Dealers of Distinction for 2023
More Materials Handling

About the Author

Jeff Berman's avatar
Jeff Berman
Jeff Berman is Group News Editor for Logistics Management, Modern Materials Handling, and Supply Chain Management Review and is a contributor to Robotics 24/7. Jeff works and lives in Cape Elizabeth, Maine, where he covers all aspects of the supply chain, logistics, freight transportation, and materials handling sectors on a daily basis.
Follow Modern Materials Handling on FaceBook

Subscribe to Materials Handling Magazine

Subscribe today!
Not a subscriber? Sign up today!
Subscribe today. It's FREE.
Find out what the world's most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today.

Latest Resources

Materials Handling Robotics: The new world of heterogeneous robotic integration
In this Special Digital Edition, the editorial staff of Modern curates the best robotics coverage over the past year to help track the evolution of this piping hot market.
Case study: Optimizing warehouse space, performance and sustainability
Optimize Parcel Packing to Reduce Costs
More resources

Latest Resources

2023 Automation Study: Usage & Implementation of Warehouse/DC Automation Solutions
2023 Automation Study: Usage & Implementation of Warehouse/DC Automation Solutions
This research was conducted by Peerless Research Group on behalf of Modern Materials Handling to assess usage and purchase intentions forautomation systems...
How Your Storage Practices Can Affect Your Pest Control Program
How Your Storage Practices Can Affect Your Pest Control Program
Discover how your storage practices could be affecting your pest control program and how to prevent pest infestations in your business. Join...

Warehousing Outlook 2023
Warehousing Outlook 2023
2023 is here, and so are new warehousing trends.
Extend the Life of Brownfield Warehouses
Extend the Life of Brownfield Warehouses
Today’s robotic and data-driven automation systems can minimize disruptions and improve the life and productivity of warehouse operations.
Power Supply in Overhead Cranes: Energy Chains vs. Festoons
Power Supply in Overhead Cranes: Energy Chains vs. Festoons
Download this white paper to learn more about how both systems compare.