New rules for shipping to Canada

If adopted, wood packaging materials must meet ISPM 15 regulations for heat treatment before crossing borders
image
By Bob Trebilcock, Executive Editor
February 03, 2011 - MMH Editorial

A new proposal from the U.S. Department of Agriculture, Animal and Plant Health Inspection Service (APHIS) would remove the exemption from ISPM 15 on wood packaging material moving between Canada and the United States in both directions beginning in 2011. If adopted, the proposal will have a significant impact on shipments on pallets.

While business regulation is out of favor on Capital Hill, this is one new regulation supported by the National Wooden Pallet & Container Association. “We’re in favor of it,” says Bruce Scholnick, president of the industry association. “Take it to the next step, we are also hopeful that there will be a similar implementation for all domestic shipments. That is a standard we have been fighting for.”

Right now, pallets move back and forth between Canada and the United States without the special treatment that’s required under ISPM 15. This regulation requires that wood packaging material being shipped internationally be heat-treated to kill insects or larvae that could infest native woodlands. The proposed amendment, posted by APHIS on December 2, 2010, would remove the exemption that currently allows wood packaging material to ship between Canada and the United States without first meeting the treatment and marking requirements of ISPM 15 that apply to wood packaging material to and from all other countries. “This action is necessary in order to prevent the dissemination and spread of pests via wood packaging material from Canada,” APHIS stated. Read the entire proposal.

Similarly, the Canadian Food Inspection Agency (CFIA) announced that it has agreed with APHIS to a “harmonized approach to removing the exemption from ISPM 15 on wood packaging material moving between Canada and the US (both directions).”

According to CFIA, the requirements would be phased in between 2011 and 2112, with full implementation in place by the summer of 2012, although “no actual time frames have been confirmed at this date.”

Scholnick says the proposal will have no effect on companies that are already shipping internationally. “They have a system in place to source heat-treated pallets,” he says. “They’ll just have to ship them to Canada.” For shippers not currently heat treating, Scholnick says the process adds 50 to 75 cents to a pallet.

Why is NWPCA in support of the regulation? “We believe the spread of pests primarily happens when logs or firewood are shipped back and forth, but pallets also get blamed,” says Scholnick. “If we have a standard that requires all pallets to be heat treated, even domestically, it will take that issue off the table.”


Building the better unit load
Pallets don’t work in a vacuum. Getting the most from your unit load depends on how your pallets, materials handling systems and industrial packaging work together.

Getting the most from your stretch wrap
How you apply your stretch wrap is more important than the thickness of the film



About the Author

Bob Trebilcock
Executive Editor

Bob Trebilcock, executive editor, has covered materials handling, technology and supply chain topics for Modern Materials Handling since 1984. More recently, Trebilcock became editorial director of Supply Chain Management Review. A graduate of Bowling Green State University, Trebilcock lives in Keene, NH. He can be reached at 603-357-0484.


Subscribe to Modern Materials Handling magazine

Subscribe today. It's FREE!
Find out what the world's most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today!

Recent Entries

For companies large and small, an often overlooked key to handling sales growth in their DC is having the right picking strategies and technologies. Your current facility can do more than you think -- you just need to take a hard look at your current equipment and processes to maximize productivity with improved strategies or advanced technologies.

Dassault Systèmes, the 3DEXPERIENCE Company, a world leader in 3D design software, 3D Digital Mock Up and Product Lifecycle Management (PLM) solutions, today announced the signing of a definitive share purchase agreement for Dassault Systèmes to acquire Quintiq, a leading provider of on-premise and on-cloud supply chain and Operations Planning & Optimization software, for approximately €250 million

During this complimentary webcast you'll learn the 6 reasons your operation could benefit from voice and multi-modal solutions and exactly how The Container Store did it. They were able to improve efficiency, safety and accuracy, without a complete WMS overhaul and their employees find it faster and easier to use.

Study suggests solutions for filling the talent gap, including the development of robust ties with the education system.

Global business optimism reaches highest level in survey history.

Article Topics

News · Pallets · Pallet Report · Load Unitization · NWPCA · All topics

Comments

Post a comment
Commenting is not available in this channel entry.


© Copyright 2013 Peerless Media LLC, a division of EH Publishing, Inc • 111 Speen Street, Ste 200, Framingham, MA 01701 USA