Packaging: Robotic palletizers paint a picture of efficiency

Customized solutions address unique challenges while improving worker safety.
By Josh Bond, Senior Editor
October 20, 2011 - MMH Editorial

Kelly-Moore Paints, the fifth-largest paint company in the United States, identified two important challenges at one of its manufacturing facilities: production flow inefficiencies and hand palletizing products that weigh up to 70 pounds. In an effort to improve employee safety and ergonomics, the company set out to automate its end-of-line process with robotic palletizers.

“We needed a partner that could work with us to engineer a solution that met our needs in a scalable way,” says Keith Hussinger, plant manager for Kelly-Moore Paints. “What the provider offered was exactly what we wanted: a complete, turnkey installation with an experienced team to support it.”

Two robotic arms meet the required palletizing rates while working within the limited space available at the facility. The 5-gallon pails posed a unique engineering challenge. A 2-inch diameter tinting port on each lid could not withstand a vacuum effector, so the provider custom-engineered end-of-arm tooling that prevented the flow of air from pulling out this port.

In addition, unwrapped trays of paint cans demand a tool that can pick up quart and gallon paint can patterns as well as loose cardboard trays. The provider designed an additional end-of-arm tool with a vacuum specifically for the cardboard tray.

The final design lifts the cans and secures the tray as product is moved to the pallet.

The system was installed and delivered on time and on budget during the off-peak season in 2009. Over the next year, the facility eliminated breaks required for heavy lifting with the old manual palletizing process, and increased worker comfort while decreasing lost-time accidents.

“In only one year, we have had a 76% ROI in our labor time,” says Hussinger. “Line changeovers take only 9 minutes, representing an 80% reduction in line changeover time. The transformation has been incredible.”


More Packaging Coverage

More from Modern’s 2012 Casebook

About the Author

Josh Bond
Senior Editor

Josh Bond is Senior Editor for Modern, and was formerly Modern’s lift truck columnist and associate editor. He has a degree in Journalism from Keene State College and has studied business management at Franklin Pierce University.

Subscribe to Modern Materials Handling magazine

Subscribe today. It's FREE!
Find out what the world's most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today!

Recent Entries

When DCs, plants, or any industrial facility needs more space, there are two basic options: going "out" by acquiring or building additional facilities, or "going up" by maximizing the cubic volume of existing facilities

PMMI connects end users and suppliers as they adapt to changing consumer demands.

Deployment of automated storage & retrieval (AS/RS) solutions has been delivering impressive improvements in labor or space savings within facilities for decades.

The total number of October shipments at 913,543 was flat compared to September, which was consistent with growth patterns in recent years, with 2014 up 2 percent, 2013 up 3 percent, and 2012 down 1 percent.

The secret to successful distribution center design is planning to make material handling equipment and software flexible and scalable.


Post a comment
Commenting is not available in this channel entry.

© Copyright 2015 Peerless Media LLC, a division of EH Publishing, Inc • 111 Speen Street, Ste 200, Framingham, MA 01701 USA