Casebook 2011: Stretch-wrap prototype passes its first test at Buffalo Rock Co.

Soft drink bottler gambles on new stretch wrapping technology and wins uptime lottery.
By Josh Bond, Associate Editor
January 10, 2011 - MMH Editorial

Family owned Buffalo Rock Co., an Alabama-based Pepsi bottler, has the flexibility to make quick decisions. When given the opportunity to try-out an alpha model of a new stretch-wrapping machine (Lantech, 800-866-0322, http://www.lantech.com) in 2008, the company took the offer. After the new machine eliminated line stoppages and operator intervention, easily handled damaged film rolls, and increased overall film yield, Buffalo Rock knew it had made the right choice.

The key development in the new machine was a patented system that prevented film breakages. Far from being a source of trouble, the machine was so predictable that operators would often ignore the machine until it was time to reload it with the scuffed or partial rolls of film that usually caused stoppages on other stretch wrapping machines.

“The most important issue with any stretch wrapper is consistent output,” says George Garrison, general manager of manufacturing at Buffalo Rock. “Any stoppage requires immediate response from the operators. That’s just been a non-issue with this particular machine, and a first in our plant.”

With the new stretch wrapper, the plant has cut film costs while gaining valuable data. The machine is rated at 60 to 80 pallets per hour, but is available with a high-speed option for 80 to 100 pallets per hour. As it wraps, the machine monitors capacity versus true utilization, stoppages for starvation, blockage or film break, loads wrapped per hour, shift, day, week and month, and loads wrapped per roll of film. The control also reports how many pallets can be wrapped with the film remaining on the roll, allowing operators to budget their time efficiently for reloading. The machine easily consumes the film down to the roll core without any usual end-of-roll tears.



About the Author

image
Josh Bond
Associate Editor

Josh Bond is an associate editor to Modern. Josh was formerly Modern’s lift truck columnist and contributing editor, has a degree in Journalism from Keene State College and has studied business management at Franklin Pierce.


Subscribe to Modern Materials Handling magazine

Subscribe today. It's FREE!
Find out what the world's most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today!

Recent Entries

Crown invited me to its flagship service center outside Chicago for a demonstration of their operator and technician training programs. Prepared for plenty of PowerPoints and goofy videos, I instead experienced two full days of hands-on, grease-covered, eye-opening and tremendously exciting education.

PwC CEO survey finds only 19% of top retailers say they can fulfill omni-channel demand profitably.

Seegrid’s former director of development from 2003-2007 returns to the company.

March shipments came in at 988,065, which easily eclipsed February by 24 percent, as well as March 2014 by 19 percent. Panjiva said total first quarter shipments at 2,580,899 were 4 percent ahead of the first quarter of 2014.

Diligent monitoring of battery inventory can cut waste, boost battery performance and lifespan, and increase productivity.

Comments

Post a comment
Commenting is not available in this channel entry.


© Copyright 2015 Peerless Media LLC, a division of EH Publishing, Inc • 111 Speen Street, Ste 200, Framingham, MA 01701 USA