Vehicle manufacturer triples storage with automatic guided vehicles

Casebook 2012: Vehicle manufacturer uses automation to turn line-side storage into on-demand parts delivery.
By Josh Bond, Senior Editor
October 17, 2011 - MMH Editorial

When a vehicle manufacturer was assembling just one vehicle type in its facility, it had plenty of space for a FIFO (first-in, first-out) line-side parts storage system. But when the company considered expanding the assembly line from one vehicle type to three, it faced cramped floor space, extreme complexity in the assembler’s job, and increased travel distance between parts and the assembly task. The company found that a custom-engineered automatic guided vehicle (AGV) fleet could replace the line-side storage system with an automated parts sequencing operation for just-in-time parts retrieval.

Now, 19 customized and color-coded AGV carts deliver parts along paths marked by adhesive-backed magnetic tape. High-traffic areas use an embedded guide-path magnetic strip.  Pieces of tape, aligned in specific patterns along the route, initiate various AGV functions such as turns, stops and speed changes.

The AGV drives operate on a 24-volt system with two 12-volt lead acid batteries, have a 1500-pound weight capacity, travel at a maximum speed of 82 fpm, and have a 24-inch turning radius. Safety equipment includes an audible warning device, flashing light, non-contact obstacle sensor, safety bumper and e-stops resulting in a safety category “B” rating.

The AGV carts have a deck for totes or boxes when required and hitches for towing trains of sequenced kitting carts. When necessary, the AGV carts have a convenient handle for manually moving them by raising the spring-loaded drive off the floor with a foot release pedal.

The batteries nest in battery boxes on a tray supported by rollers on the AGV cart, battery transfer cart, and battery charging station.  The batteries are simply rolled off the AGV cart on to the battery transfer cart and then on to the charging station.  Each vehicle has three sets of batteries for 24/7 operation.

In addition to increasing worker comfort and productivity, the new system ensures parts are always available for assembly and available space is used as efficiently as possible.

Creform Corporation

More Fixed Path Coverage

More from Modern’s 2012 Casebook

About the Author

Josh Bond
Senior Editor

Josh Bond is Senior Editor for Modern, and was formerly Modern’s lift truck columnist and associate editor. He has a degree in Journalism from Keene State College and has studied business management at Franklin Pierce University.

Subscribe to Modern Materials Handling magazine

Subscribe today. It's FREE!
Find out what the world's most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today!

Recent Entries

PMMI connects end users and suppliers as they adapt to changing consumer demands.

Deployment of automated storage & retrieval (AS/RS) solutions has been delivering impressive improvements in labor or space savings within facilities for decades.

The total number of October shipments at 913,543 was flat compared to September, which was consistent with growth patterns in recent years, with 2014 up 2 percent, 2013 up 3 percent, and 2012 down 1 percent.

The secret to successful distribution center design is planning to make material handling equipment and software flexible and scalable.

Leading global supplier of integrated automated technology to acquire leading provider of warehouse execution software.


Post a comment
Commenting is not available in this channel entry.

© Copyright 2015 Peerless Media LLC, a division of EH Publishing, Inc • 111 Speen Street, Ste 200, Framingham, MA 01701 USA