Wynright’s Mega Mezzanine earns design award from Steel Joist Institute

The much-coveted award was presented to Wynright Structural Solutions for the design, manufacture and installation of a 135,000-square-foot mezzanine erected in SKECHERS USA's 1.8-million-square-foot warehouse in Moreno Valley, CA.
By Modern Materials Handling Staff
October 11, 2011 - MMH Editorial

Wynright Corporation,a leading independent, U.S.-based provider of intelligent materials handling systems, has received the Steel Joist Institute’s 2011 Design Award. The much-coveted award was presented to Wynright Structural Solutions for the design, manufacture and installation of a 135,000-square-foot mezzanine erected in SKECHERS USA’s 1.8-million-square-foot warehouse in Moreno Valley, CA.

The award-winning mezzanine is an integral part of a complex material handling system designed and installed for SKECHERS USA. Being located in a high seismic risk area, the structure needed to meet the stringent requirements of Seismic Design Category E. To assure the structural performance of the mezzanine, Wynright Structural Solutions designed a moment frame system utilizing joists and joist girders to resist the type of horizontal forces that could be produced in a high seismic risk area such as Moreno Valley, CA.

“Joists are typically employed as simple span members and therefore only contribute to a structure’s seismic load resisting system (SLRS) as part of a roof or floor,” explained Ted Zurkowski, President of Wynright Structural Solutions. “In this project the joist girders and tie joists were designed as critical, primary members within the SLRS, effectively treating each mezzanine column as its own mini-SLRS.” Applying this unique strategy allowed the seismic forces to be widely distributed throughout the mezzanine, creating a far more flexible and redundant structural system as a whole. This design also resulted in smaller foundation loads and a simpler, more economical footing design.

“Judging for the project was based on flexibility, speed of construction, value, and aesthetic considerations,” stated J. Kenneth Charles III, managing director of the Steel Joist Institute. Valley-Joist West, the steel joist manufacturer for the project, was also recognized. The Steel Joist Institute’s award is accompanied by a scholarship which will be presented to the University of Illinois’ engineering department in Wynright’s name.

Subscribe to Modern Materials Handling magazine

Subscribe today. It's FREE!
Find out what the world's most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today!

Recent Entries

When DCs, plants, or any industrial facility needs more space, there are two basic options: going "out" by acquiring or building additional facilities, or "going up" by maximizing the cubic volume of existing facilities

PMMI connects end users and suppliers as they adapt to changing consumer demands.

Deployment of automated storage & retrieval (AS/RS) solutions has been delivering impressive improvements in labor or space savings within facilities for decades.

The total number of October shipments at 913,543 was flat compared to September, which was consistent with growth patterns in recent years, with 2014 up 2 percent, 2013 up 3 percent, and 2012 down 1 percent.

The secret to successful distribution center design is planning to make material handling equipment and software flexible and scalable.

Article Topics

News · Storage · Wynright · Mezzanines · All topics


Post a comment
Commenting is not available in this channel entry.

© Copyright 2015 Peerless Media LLC, a division of EH Publishing, Inc • 111 Speen Street, Ste 200, Framingham, MA 01701 USA