X-Mold builds a better mouse trap, but is anyone buying

By Bob Trebilcock, Executive Editor
December 15, 2010 - MMH Editorial

“Build a better mousetrap, and the world will beat a path to your door.” Ralph Waldo Emerson

You probably don’t think of pallets and innovation in the same breath, but Matt Foley, director of sales for X-Mold, a chemical manufacturer of products that address mold, mildew, sap stains and other related issues, thinks his company has built a better mousetrap.

In this case, it’s a specially-formulated mold and mildew resistant wood coating approved by NSF International for use on pallets that transport packaged goods. NSF International is a not-for-profit, non-governmental agency that focuses on public health and safety. A product certified or listed means that NSF reviewed the product; determined at the time of the review that the product complies with the relevant NSF consensus standard and/or protocol; and conducted or will conduct periodic audits to review whether the product continues to comply with the standard.

While there are other chemical fungicides to prevent mold on the market, one of the things that makes X-Mold different, according to my friends in the pallet industry that ought to know, is that they have not only developed a pretty good chemical formulation for preventing mold, they have also paired it with an innovative electrostatic spraying technology, available through equipment manufacturing partner Baker Products, that creates a thorough and even coating of the chemical that bonds to the wood. The system can be used to treat finished pallets or cut stock, the raw boards and stringers that are used to manufacture a pallet. You can watch a video of the system here. It’s effective, efficient and relatively cost effective.

Given that pallets and mold have been thrust into the limelight following product recalls by Johnson & Johnson and Pfizer blamed on moldy pallets manufactured in the Caribbean, you would think that these are banner times for Foley and X-Mold. So far, that hasn’t been the case. “The pallet industry is getting mixed messages from pallet users,” says Foley. “On the one hand, they say they don’t want mold on their pallets. On the other hand, they don’t want pallets with chemicals.”

The reason is that there’s been a lot of misinformation in the marketplace. A number of leading pallet users have issued mandates that they want heat treated pallets that are chemical free thinking that will solve the problem. The problem, as experts at Virginia Tech and the National Wooden Pallet & Container Association, point out, is that heat treating is great at killing insects but it may actually encourage the growth of mold.

Other pallet users, especially those in the food, beverage, pharmaceutical and healthcare industries, are waiting for the FDA to put its seal of approval on a solution, since the pallets at issue were used to transport healthcare products. The problem, as Foley points out, is that the FDA is not in the business of approving packaging materials: the agency’s job is to insure the safety of food products, dietary supplements and drugs. “The marketplace would like the FDA or some other agency to wave a magic wand and absolve a company of liability and risk, but that’s not the reality of the world we live in,” says Foley.

What’s an innovator to do? “Mold season has come and gone. There’s not a lot of moisture that can cause mold when it’s cold,” says Foley. “So, we’re working to educate manufacturers and end users of pallets that we have a state of the art formulation that will put a mold and mildew resistant layer of protection on a piece of wood. We’re banging the drum that mold free and chemical free are mutually exclusive.”

About the Author

Bob Trebilcock
Executive Editor

Bob Trebilcock, executive editor, has covered materials handling, technology and supply chain topics for Modern Materials Handling since 1984. More recently, Trebilcock became editorial director of Supply Chain Management Review. A graduate of Bowling Green State University, Trebilcock lives in Keene, NH. He can be reached at 603-357-0484.

Subscribe to Modern Materials Handling magazine

Subscribe today. It's FREE!
Find out what the world's most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today!

Recent Entries

MHI announced the MHI 2015 Innovation and Young Professional Award winners last night at their 70th Anniversary Celebration during ProMat 2015.

Today marks the conclusion of ProMat 2015, four days of comprehensive problem solving and networking to provide solutions to the complex manufacturing and supply chain challenges faced by industry today.

With a record 155,000 square feet of exhibit space reserved by nearly 350 companies back in December 2014, Modex 2016 will continue the show’s expansion in both solution offerings and popularity.

Doosan (Booth 662) highlighted the new BR18/20SP-7 narrow aisle reach truck, its first product in the class. It also showcased its first engine, which replaced third-party engines and is now used in all Doosan products.

During Wednesday’s afternoon keynote address, Apple co-founder Steve Wozniak, affectionately known as “The Woz,” suggested the future of technology now is every bit as uncertain to him as it was 30 years ago.

Article Topics

Blogs · Pallets · Pallet Report · Pallet Pool · X-Mold · All topics

About the Author

Bob Trebilcock, editorial director, has covered materials handling, technology, logistics and supply chain topics for nearly 30 years. In addition to Supply Chain Management Review, he is also Executive Editor of Modern Materials Handling. A graduate of Bowling Green State University, Trebilcock lives in Keene, NH. He can be reached at 603-357-0484 or email [email protected].


Post a comment
Commenting is not available in this channel entry.

© Copyright 2015 Peerless Media LLC, a division of EH Publishing, Inc • 111 Speen Street, Ste 200, Framingham, MA 01701 USA