Dearco Paint & Decorating uses advanced curtain-side technology

The 30-second vehicle access system has boosted loading and delivery efficiency.

By ·

Glass truck design began as a moderately uncomplicated affair. As long as angled glass racks were mounted on a vehicle platform, business could be conducted.

“Open glass racks provided easy access for loading and unloading, but there was an obvious problem—the cargo was glass,” says Jeff Knope, president of Dearco Paint & Decorating. “Unprotected glass sheets traveling on-road, off-road and through inclement weather was a recipe for complications.”

While in transit, not only was the glass exposed to chemicals and road debris that might chip, crack or otherwise damage the glass, but the fragile cargo also inevitably arrived with a coating of dirt and grime—even in clear weather. The residual film on the glass often took significant time and effort to remove, and, depending on the nature of the deposits, could cause scratches and abrasions to occur in the process of unloading or cleaning.

“The application of curtain sides on glass haulers was a huge advancement, but it came at a cost,” Knope says. “A curtain-side glass truck provided protection from the elements (reducing cargo damage expenses) and the glass arrived at its destination in far better condition. The problem was that the easy access originally afforded by open rack systems was gone. While they performed admirable in protecting their cargo, operating buckle-style closures and tensioning mechanisms on the original curtain-side systems were time consuming and ergonomically challenging.”

Since the decks on glass trucks are usually designed to approximate axle height, the buckle fasteners that secure the lower edge of the protective curtains are generally located only 12 to 18 inches from the ground. Likewise, tensioning mechanisms, which are required to prevent the curtains from flapping and admitting water and debris, are located at the same height.

So, while the buckle-style curtains performed their job, the jobs of those operating them were far more laborious and prone to injury. Loading and delivery personnel had to bend, kneel and stoop to open and close 10 to 20 buckles per side, depending on the vehicle configuration, and crank the tensioners on both sides. And then the vertical curtain anchor posts (at each end of the curtain) had to be correctly seated.

As a manufacturer of glass trucks, fire and emergency apparatus, commercial truck bodies and custom engineered vehicles, Marion Body Works became aware of a curtain-side vehicle access system that opens and closes at both ends of a truck or trailer. Cargo can be fully accessed and the curtain closed again within just 30 seconds. Operation promotes worker health and good posture.

“Our customer, Dearco Glass Paint & Decorating, just happened to be in the market for a new curtain-side glass hauler with a 12-foot rack,” says Don Schinke, inside sales specialist for Marion Body Works. “It was a perfect example of being in the right place at the right time.”

Having sold curtain-side glass trucks to Dearco before, Marion took the opportunity to show Dearco the new system and Dearco’s management ordered a new glass truck outfitted with it.

The system has a unique, full-length, vertical, multi-latch closure system with an adjacent, all-in-one latch-release mechanism located in the front and rear. Its curtains can be opened with one hand, and closed the same way. The curtains slide smoothly on rollers (located at both the top and bottom) and once they’re closed, they create a rigid, sealed curtain wall without the need for tensioning or additional adjustments.

“Choosing this system on our new glass truck was a pragmatic business decision,” Knope says. “Not only could we calculate a significant savings in loading and unloading time, but the reduction of strain on our workers [also] equated to an even greater intrinsic value for our company.”

Kinedyne
(800) 848-6057


Subscribe to Modern Materials Handling Magazine!

Subscribe today. It's FREE!
Find out what the world’s most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today!

Article Topics

Casebook · Dock Equipment · Ergonomics · Kinedyne · Safety · · All Topics
Latest Whitepaper
Making the Case for Warehouse Consultants
Benefits for logistics/operations managers, CFOs, and COOs all lead to safer workplaces, lower costs, and happier customers.
Download Today!
From the January 2019 Modern Material Handling Issue
One of Canada’s largest retail brands took bulk handling to new levels of automation and efficiency at its new Ontario DC.
Inside Canadian Tire Distribution Center: Design for flexibility
Continuous improvement in action
View More From this Issue
Subscribe to Our Email Newsletter
Sign up today to receive our FREE, weekly email newsletter!
Latest Webcast
The Impact of e-Commerce on an Organization’s Fulfillment Operations
This exclusive research study, conducted by Modern Materials Handling on behalf of Honeywell, investigates the consequences e-commerce has on an organization’s fulfillment operation.
Register Today!
EDITORS' PICKS
Systems Report: Bulking up at Canadian Tire
One of Canada’s largest retail brands took bulk handling to new levels of automation and...
Resilience and innovation at Gap Inc.
Just months before the start of the 2016 holiday season, one of Gap Inc.’s distribution centers...

System Report: Luxottica keeps it simple
Simplification and consolidation drove the design of a new 1.1-million-square-foot logistics campus...
Goya Foods’ secret ingredient: Lift trucks
The leader in Hispanic food and beverage products puts a variety of lift trucks and racks to work in...