Order fulfillment at Educational Development Corp.

EDC brought in a WMS, lights, powered conveyor and sortation to write a new chapter in the book distributor’s distribution story.

By ·

Educational Development Corp.

Tulsa, Okla.


Size of Facility

150,000 square feet

Products Handled in the Facility

Children’s books

Throughput

6,000 to 7,000 orders per day

SKUs

2,000

Shifts Per Day/ Days Per Week:

1 shift per day, 5 days per week


You can also read the feature article “Educational Development Corp. writes a new chapter in distribution” to learn more about the Education Development Corp. distribution center redesign.


Receiving

Much of the product received (1) at the facility is floor loaded, so the first step in the receiving process is to create a license plate bar code label for a new pallet. Cartons are then unloaded and scanned to a pallet. Once the pallet is built, it’s ready for storage. Warehouse personnel, rather than the warehouse management system (WMS), determine the putaway location in the reserve storage area (2) based on an empty location report.

Replenishment

Replenishment of the pick modules (3,4,5) is directed by the WMS based on minimum/maximum levels at pick locations. Pallets are delivered to a staging location, where stockers then complete the replenishment process.

Picking

Orders drop into the WMS system, which features a line-load allocation process so that work is spread across the three pick lines. Lines 1 and 2 (3, 4) are mirror images of each another. Line 3 (5) is typically used to segregate orders that can be filled from EDC’s fastest-moving items. The WMS first looks at every order and queries as to whether there is inventory on one of the pick lines to fill the order and then balances the work on the two pick lines. In addition, supervisors examine orders that aren’t allocated by the WMS.

At the induction station of each pick line (6,7,8), an associate scans the bar code on the order and on a tote, marrying an order to a tote. Once on the conveyor, the tote travels to the first camera that “reads” the bar code on the tote and queries the pick-to-light system to determine if any picks are in either of the two zones the tote just passed. If so, the tote is diverted to the appropriate side of the first section of pick line; once all the items from that side of the pick line have been selected, the tote gets pushed back onto the powered center conveyor and once again travels to first camera to determine if it needs to be diverted to the other side. If not, it travels to the next camera and the process repeats until it has made its way through the entire pick line. The average order size is seven line items and the pick line has 14 pick zones so the average order could bypass half of the pick line.

Packing

Once an order is picked complete, it is inducted onto the packing conveyor serving that line (9 is conveyor for Line 3 and 10 is conveyors for Lines 1 & 2) and conveyed to a pack station. There are three packing areas in the facility. One area (11) is reserved for Line 3 orders; another area (12) is packing for Lines 1 & 2. In addition, a special area (13) is set aside for orders that can be shipped in smaller packaging. At each area, packers have a small laptop, scanners and a small label printer. Every book is scanned, and if the system confirms that the order has been picked complete, it automatically prints the packing list and the UPS shipping label. From there, it goes to an overhead void fill, the carton is automatically sealed, and travels on the shipping conveyor (14 serves Lines 1 & 2 and 15 services Line 3) to shipping (16). The Line 3 shipping conveyor is overhead and packages travel down a chute to shipping. Powered flexible conveyors (17) deliver the shipping containers into the trucks.


System suppliers

Consulting: UPS
System Integrator, Conveyor and Sortation: Cisco-Eagle
Converyor & Sortation: Hytrol
Rack: Steel King
Flow Rack: Mallard
WMS: Deposco
Pick-to-Light and WCS: Lightning Pick
Bar Code Scanning: Honeywell


About the Author

Bob Trebilcock
Bob Trebilcock, editorial director, has covered materials handling, technology, logistics and supply chain topics for nearly 30 years. In addition to Supply Chain Management Review, he is also Executive Editor of Modern Materials Handling. A graduate of Bowling Green State University, Trebilcock lives in Keene, NH. He can be reached at 603-357-0484.

Subscribe to Modern Materials Handling Magazine!

Subscribe today. It's FREE!
Find out what the world’s most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today!

Article Topics

Packaging · System Report · WMS · · All Topics
Latest Whitepaper
Southworth Brouchure Shows Practical Applications of Ergonomics
This little booklet done in comic book style uses simple illustrations to take readers on a walk through a hypothetical, yet typical, plant where the plant manager, safety director, and controller point out a variety of problems that were solved through the practical application of ergonomics.
Download Today!
From the December 2018 Modern Materials Handling Issue
EDC brought in a WMS, lights, powered conveyor and sortation to write a new chapter in the book distributor’s distribution story.
Educational Development Corp. writes a new chapter in distribution
2018 Top 20 warehouses
View More From this Issue
Subscribe to Our Email Newsletter
Sign up today to receive our FREE, weekly email newsletter!
Latest Webcast
The Impact of e-Commerce on an Organization’s Fulfillment Operations
This exclusive research study, conducted by Modern Materials Handling on behalf of Honeywell, investigates the consequences e-commerce has on an organization’s fulfillment operation.
Register Today!
EDITORS' PICKS
Resilience and innovation at Gap Inc.
Just months before the start of the 2016 holiday season, one of Gap Inc.’s distribution centers...
System Report: Luxottica keeps it simple
Simplification and consolidation drove the design of a new 1.1-million-square-foot logistics campus...

Goya Foods’ secret ingredient: Lift trucks
The leader in Hispanic food and beverage products puts a variety of lift trucks and racks to work in...
Arvato SCM Solutions: Fashion Logistics
At its Hannover, Germany, facility, e-commerce logistics provider Arvato SCM Solutions is using...