MMH    Topics 

ISM reports May manufacturing data hits a rough patch


Manufacturing activity in May contracted for the first time since November 2012, according to the Institute for Supply Management (ISM).

The PMI, the index used by the ISM to measure manufacturing activity—at 49 in May was down 1.7 percent from April’s 50.7 and 2.3 percent below March’s 51.3. A reading of 50 or higher indicates growth is occurring, and prior to May the PMI had been over the 50 mark for the last five months. May’s PMI was 2.1 percent below the 12-month average of 51.1 and is the lowest PMI in the last 12-months.

May’s PMI is at its lowest level since June 2009’s 45.8.

Economic activity in the manufacturing sector had expanded for 34 straight months prior to contraction in June 2012, and overall economic activity has now expanded for 48 straight months, according to ISM.

New Orders, which are often referred to as the engine that drives manufacturing, were down 3.5 percent to 48.8 in May and is the first month New Orders have contracted since December 2012, when it was at 49.7. Production in May fell 4.9 percent to 48.6 from April’s 53.5 and showed contraction for the first time since August 2012 at 48.9 and is only the second time it has contracted since May 2009. Employment was essentially flat, falling 0.1 percent to 50.1.

“The PMI at 49 is disappointing, and it is also momentary from the sense I have of the data and it is inconsistent compared to the data from our semiannual forecast, which forecasted revenue growth of 4.8 percent” said Bradley J. Holcomb, CPSM, CPSD, chair of the ISM Manufacturing Business Survey Committee, in an interview. “I still think we are well positioned for the second half of the year, but we are in sort of unknown territory here, as this was a down month.”

New Orders were down in eight sectors tracked by the ISM, which Holcomb said was a significant reason for May’s decline. What’s more, of the eight sectors showing declines, four of the biggest were among those with lighter orders in May: computer & electronic products; chemical products; transportation equipment; and petroleum & coal products.

As for May Production, Holcomb explained that the 4.9 percent drop was a response—
or a measured move—due to the fact that New Orders were not appearing.

“You don’t want to overproduce in a situation like this and put yourself in a bad place relative to employment or inventories,” he said. “I think this is a response as Backlog of Orders (down 5.0 percent to 48.0 in May) also contracted, so if there was a strong backlog, there might have been more production activity. But I think this is a measured move on the part of manufacturers.”

May Supplier Deliveries decreased 2.2 percent to 48.7, and Holcomb said that number is a reflection of suppliers having too much inventory that allowed them to respond faster or deliver their supplies faster. Inventories were up 2.5 percent to 49.0.

Prices were down 0.5 percent to 49.5, with total prices down a cumulative 12 percent over the last three months. Holcomb said this situation is OK for a short period of time as prices tend to rise over the first three months of the year, when suppliers roll out price increases.


Article Topics

News
ISM
   All topics

Latest in Materials Handling

RoboGeorgia launches to make Georgia a leading robotics and automation hub
Vehicle-mounted computers: Beyond rugged
New packaging idea for the cold chain
Autonomous mobile robots (AMRs) offer modern solution to challenges of traditional farming
Hyster-Yale Group provides students with real-world AI experience in 2024 Kellogg Design Challenge
KION Group’s board extends CEO Rob Smith’s contract by five years
UniCarriers Forklift joins Quality Equipment in opening celebration of new location
More Materials Handling

About the Author

Jeff Berman's avatar
Jeff Berman
Jeff Berman is Group News Editor for Logistics Management, Modern Materials Handling, and Supply Chain Management Review and is a contributor to Robotics 24/7. Jeff works and lives in Cape Elizabeth, Maine, where he covers all aspects of the supply chain, logistics, freight transportation, and materials handling sectors on a daily basis.
Follow Modern Materials Handling on FaceBook

Subscribe to Materials Handling Magazine

Subscribe today!
Not a subscriber? Sign up today!
Subscribe today. It's FREE.
Find out what the world's most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today.

Latest Resources

Materials Handling Robotics: The new world of heterogeneous robotic integration
In this Special Digital Edition, the editorial staff of Modern curates the best robotics coverage over the past year to help track the evolution of this piping hot market.
Case study: Optimizing warehouse space, performance and sustainability
Optimize Parcel Packing to Reduce Costs
More resources

Latest Resources

2023 Automation Study: Usage & Implementation of Warehouse/DC Automation Solutions
2023 Automation Study: Usage & Implementation of Warehouse/DC Automation Solutions
This research was conducted by Peerless Research Group on behalf of Modern Materials Handling to assess usage and purchase intentions forautomation systems...
How Your Storage Practices Can Affect Your Pest Control Program
How Your Storage Practices Can Affect Your Pest Control Program
Discover how your storage practices could be affecting your pest control program and how to prevent pest infestations in your business. Join...

Warehousing Outlook 2023
Warehousing Outlook 2023
2023 is here, and so are new warehousing trends.
Extend the Life of Brownfield Warehouses
Extend the Life of Brownfield Warehouses
Today’s robotic and data-driven automation systems can minimize disruptions and improve the life and productivity of warehouse operations.
Power Supply in Overhead Cranes: Energy Chains vs. Festoons
Power Supply in Overhead Cranes: Energy Chains vs. Festoons
Download this white paper to learn more about how both systems compare.