MMH    Topics 

Long stretch of manufacturing growth comes to a halt in August, reports ISM


While recent months continued to show a pattern of a slowing down in manufacturing activity, even though the sector was still showing overall growth, data issued today by the Institute for Supply Management in its Manufacturing Report on Business (ISM) showed that manufacturing activity officially contracted in August, snapping a 35-month run of positive growth.

The report’s key metric, the PMI, fell 2.1% to 49.1 (a reading of 50 or higher indicates growth), following a 0.5% decrease in July and 0.4%, 0.7%, and 2.7% declines in June, May, and April, respectively. Despite the PMI being in contraction territory, the overall economy grew in August for the 124th consecutive month. The August 2019 PMI is 5.3% below the 12-month average of 54.4, with August marking the lowest reading during that span and is also the lowest PMI reading going back to October 2016.

ISM reported that nine of the 18 manufacturing sectors it tracks saw growth in August, including: Textile Mills; Furniture & Related Products; Food, Beverage & Tobacco Products; Wood Products; Petroleum & Coal Products; Nonmetallic Mineral Products; Machinery; Miscellaneous Manufacturing; and Chemical Products. The seven industries reporting contraction in August — in the following order — are: Apparel, Leather & Allied Products; Fabricated Metal Products; Transportation Equipment; Primary Metals; Plastics & Rubber Products; Paper Products; and Electrical Equipment, Appliances & Components.

Each of the report’s key metrics, including the PMI, were down in August.

New orders, which are commonly referred to as the engine that drives manufacturing, came in at 47.2, marking its first month of contraction after 43 consecutive months of expansion, over which time it had a cumulative average of 58.5. ISM said that three of the 18 manufacturing sectors it tracks grew in August.

Production, at 49.5, was down 1.3%, snapping a stretch of 35 consecutive months of growth, down for the first time since August 2016’s 49.6. Four manufacturing sectors reported growth in August. Employment fell 4.3% to 47.4 after 34 consecutive months of growth, contracting for the first time since September 2016, when it was at 48.9.

And supplier deliveries, at 51.4 (a reading above 50 indicates contraction) was 1.9% lower than July’s 53.3 reading, which is the lowest reading since September 2016’s 50.2, marking the 42nd consecutive month of slowing supplier deliveries. Inventories were up 0.4% to 49.9, contracting for the third month in a row.

Comments in the report submitted by ISM member respondents were consistent, with commentary on slowing business conditions and ongoing trade tension between the United States and China.

A chemical products respondent noted that while business is strong there is an undercurrent of fear and alarm regarding the trade wars and potential recession. A furniture and related products respondent said that incoming sales seem to be slowing down during what is usually the respondent’s busiest season, adding that there are concerns about the economy and tariffs.

ISM Manufacturing Business Survey Committee Chair Tim Fiore said in an interview that with new orders posting the lowest reading of the key PMI sub index, at 47.2, after a few months in the low 50s range, coupled with new export orders down 4.8% to 43.3, there is a direct correlation there.

“Without growth in new orders, nothing really happens,” said Fiore. “There is plenty of production capacity, employee levels are staffed to do more than they are doing, supply chains are positioned to respond, and inventory counts are being micromanaged. So, it is all really around the demand side. There are some slight positives here, with the customer inventories number declining slightly [down 0.8% to 44.9], which is still considered too low and is good for the future. And the backlog of orders number contracted to 46.3 but is not as strong as prior months…that’s a slight positive. Those are the only positive things in this report.”

Fiore likened the data in this report, in viewing the current state of manufacturing, to the sector “running out of gas,” driven by a lack of new orders, which is happening because the global economy has slowed down and impacted various manufacturing sectors that are active exporters.

When asked about the possibility of the PMI getting back to a reading of 50 or higher by the end of 2019, Fiore explained that it is difficult to assess, as an increase in new orders is needed.

“We are entering a period of September, October, and half of November that are strong manufacturing periods,” he said. “That is a positive. August tends to be a sleepy month, with lots of people taking time off, which means there is not a lot of production output and not as many people are hired in August, and people are going back to school, too. Without the new export number coming back to expansion mode, it is unclear what is going to drive the new orders number up.”


Article Topics

News
ISM
Manufacturing
   All topics

Latest in Materials Handling

Geek+ and System Teknik deploy PopPick solution for pharmacy group Med24.dk
Beckhoff USA opens new office in Austin, Texas
Manhattan Associates selects TeamViewer as partner for warehouse vision picking
ASME Foundation wins grant for technical workforce development
The (Not So) Secret Weapons: How Key Cabinets and Asset Management Lockers Are Changing Supply Chain Operations
MODEX C-Suite Interview with Harold Vanasse: The perfect blend of automation and sustainability
Consultant and industry leader John M. Hill passes on at age 86
More Materials Handling

About the Author

Jeff Berman's avatar
Jeff Berman
Jeff Berman is Group News Editor for Logistics Management, Modern Materials Handling, and Supply Chain Management Review and is a contributor to Robotics 24/7. Jeff works and lives in Cape Elizabeth, Maine, where he covers all aspects of the supply chain, logistics, freight transportation, and materials handling sectors on a daily basis.
Follow Modern Materials Handling on FaceBook

Subscribe to Materials Handling Magazine

Subscribe today!
Not a subscriber? Sign up today!
Subscribe today. It's FREE.
Find out what the world's most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today.

Latest Resources

Materials Handling Robotics: The new world of heterogeneous robotic integration
In this Special Digital Edition, the editorial staff of Modern curates the best robotics coverage over the past year to help track the evolution of this piping hot market.
Case study: Optimizing warehouse space, performance and sustainability
Optimize Parcel Packing to Reduce Costs
More resources

Latest Resources

2023 Automation Study: Usage & Implementation of Warehouse/DC Automation Solutions
2023 Automation Study: Usage & Implementation of Warehouse/DC Automation Solutions
This research was conducted by Peerless Research Group on behalf of Modern Materials Handling to assess usage and purchase intentions forautomation systems...
How Your Storage Practices Can Affect Your Pest Control Program
How Your Storage Practices Can Affect Your Pest Control Program
Discover how your storage practices could be affecting your pest control program and how to prevent pest infestations in your business. Join...

Warehousing Outlook 2023
Warehousing Outlook 2023
2023 is here, and so are new warehousing trends.
Extend the Life of Brownfield Warehouses
Extend the Life of Brownfield Warehouses
Today’s robotic and data-driven automation systems can minimize disruptions and improve the life and productivity of warehouse operations.
Power Supply in Overhead Cranes: Energy Chains vs. Festoons
Power Supply in Overhead Cranes: Energy Chains vs. Festoons
Download this white paper to learn more about how both systems compare.