MMH    Topics 

Manufacturing output declines in November, reports ISM


Manufacturing output declined in November, falling below the baseline for growth, according to the most recent edition of the Manufacturing Report on Business issued today by the Institute for Supply Management (ISM).

The report’s key metric, the PMI, was 49.0 (a reading of 50 or higher indicates growth), down 1.2% from October’s 50.2, September’s 50.9 and back-to-back readings of 52.8 in July and August, with November’s contraction snapping a stretch of 29 consecutive months of growth.

While the PMI decreased, ISM reported the overall economy expanded for the 30th consecutive month, with the November PMI falling to its lowest level since May 2020’s 43.5 reading. The November PMI is 5.4% below the 12-month average of 54.4, with November’s 49.0 marking the lowest reading over that period and December 2021’s 58.8 marking the highest.

ISM reported that six manufacturing sectors grew in November, including Apparel, Leather & Allied Products; Nonmetallic Mineral Products; Primary Metals; Miscellaneous Manufacturing; Petroleum & Coal Products; and Transportation Equipment. And of the six biggest manufacturing industries, two— Petroleum & Coal Products; and Transportation Equipment—registered weak-to-moderate growth in November, according to ISM.

The report’s key metrics were largely down in November, including:
-New orders, which are commonly referred to as the engine that drives manufacturing, fell 2%, to 47.2, contracting, at a faster rate, for the third consecutive month, with one sector reporting growth and none of the top six sectors growing;
-Production, at 51.5, fell 0.8%, growing, at a slower rate, for the 30th consecutive month, with two of the top six sectors growing and seven growing overall;
-Employment, at 48.4, dropped 1.6%, contracting on the heels of a flat November, with two of the top six sectors growing and seven growing overall;
-Supplier Deliveries, at 47.2 (a reading above 50 indicates contraction), grew, at a faster rate, for the second consecutive month, the second straight sub-50 reading, marking the first months it has been below 50 since February 2016’s 49.6, as well as the first time it has been in “faster” territory in consecutive months going back to the October-to-December period in 2015, with one of the top sectors growing and six growing overall;
-Backlog of Orders, at 40.0, dropped 5.3%, contracting, at a faster rate, for the second consecutive month, following 27 consecutive months of expansion, falling to its lowest level since May 2020’s 38.2 reading, with one top sector growing and two growing overall;
-Inventories, at 50.9, fell 1.6%, growing, at a slower rate, for the 16th consecutive month, falling to its lowest level since July 2021’s 49.1 reading, with eight sectors reporting growth, including four of the top sectors; and
-Prices, at 43.0, fell 3.6%, decreasing, at a faster rate, for the second consecutive month, and the second time in the last 29 months, for its lowest level since May 2020’s 40.8 reading, with one sector reporting growth

Comments submitted by the ISM member respondents highlighted various themes, with a central focus slowing economic momentum.

“Customer demand is softening, yet suppliers are maintaining high prices and record profits. Pushing for cost reductions based on market evidence has been surprisingly successful,” said a Computer & Electronic Products respondent.

A chemical products respondent observed that future volumes are on a downward trend for the next 60 days.

“The U.S. manufacturing sector dipped into contraction, with the Manufacturing PMI at its lowest level since the coronavirus pandemic recovery began,” wrote Tim Fiore, Chair of the ISM’s Manufacturing Business Survey Committee, in the report. “With Business Survey Committee panelists reporting softening new order rates over the previous six months, the November composite index reading reflects companies’ preparing for future lower output. Demand eased, with the (1) New Orders Index remaining in contraction territory, (2) New Export Orders Index below 50 percent for a fourth consecutive month, (3) Customers’ Inventories Index effectively in ‘just right’ territory, climbing 7.1 percentage points, and (4) Backlog of Orders Index moving deeper into contraction. Output/Consumption (measured by the Production and Employment indexes) declined month over month, with a combined negative 2.4-percentage point impact on the Manufacturing PMI calculation. The Employment Index moved back into contraction, and the Production Index decreased but still remained in modest growth territory. Panelists’ companies confirm that they are continuing to manage head counts through a combination of hiring freezes, employee attrition, and now layoffs. Inputs—defined as supplier deliveries, inventories, prices and imports—mostly accommodated future demand growth. The Supplier Deliveries Index indicated faster deliveries, and the Inventories Index expanded at a slower rate as panelists’ companies continued to manage the total supply chain inventory. The Prices Index decreased for the ninth consecutive month, falling deeper into contraction territory.”


Article Topics

News
Institute for Supply Management
ISM
Manufacturing
PMI
   All topics

Institute for Supply Management News & Resources

Services sector sees continued growth in March, notes ISM
Services sector activity sees continued growth in February, ISM reports
February manufacturing output declines, reports ISM
Services economy starts 2024 strongly, reports ISM
January manufacturing output inches closer to growth territory, reports ISM
Manufacturing output stays flat from October to November, notes ISM
October manufacturing trend shows sequential gain but falls short of growth mode, reports ISM
More Institute for Supply Management

Latest in Materials Handling

Geek+ and System Teknik deploy PopPick solution for pharmacy group Med24.dk
Beckhoff USA opens new office in Austin, Texas
Manhattan Associates selects TeamViewer as partner for warehouse vision picking
ASME Foundation wins grant for technical workforce development
The (Not So) Secret Weapons: How Key Cabinets and Asset Management Lockers Are Changing Supply Chain Operations
MODEX C-Suite Interview with Harold Vanasse: The perfect blend of automation and sustainability
Consultant and industry leader John M. Hill passes on at age 86
More Materials Handling

About the Author

Jeff Berman's avatar
Jeff Berman
Jeff Berman is Group News Editor for Logistics Management, Modern Materials Handling, and Supply Chain Management Review and is a contributor to Robotics 24/7. Jeff works and lives in Cape Elizabeth, Maine, where he covers all aspects of the supply chain, logistics, freight transportation, and materials handling sectors on a daily basis.
Follow Modern Materials Handling on FaceBook

Subscribe to Materials Handling Magazine

Subscribe today!
Not a subscriber? Sign up today!
Subscribe today. It's FREE.
Find out what the world's most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today.

Latest Resources

Materials Handling Robotics: The new world of heterogeneous robotic integration
In this Special Digital Edition, the editorial staff of Modern curates the best robotics coverage over the past year to help track the evolution of this piping hot market.
Case study: Optimizing warehouse space, performance and sustainability
Optimize Parcel Packing to Reduce Costs
More resources

Latest Resources

2023 Automation Study: Usage & Implementation of Warehouse/DC Automation Solutions
2023 Automation Study: Usage & Implementation of Warehouse/DC Automation Solutions
This research was conducted by Peerless Research Group on behalf of Modern Materials Handling to assess usage and purchase intentions forautomation systems...
How Your Storage Practices Can Affect Your Pest Control Program
How Your Storage Practices Can Affect Your Pest Control Program
Discover how your storage practices could be affecting your pest control program and how to prevent pest infestations in your business. Join...

Warehousing Outlook 2023
Warehousing Outlook 2023
2023 is here, and so are new warehousing trends.
Extend the Life of Brownfield Warehouses
Extend the Life of Brownfield Warehouses
Today’s robotic and data-driven automation systems can minimize disruptions and improve the life and productivity of warehouse operations.
Power Supply in Overhead Cranes: Energy Chains vs. Festoons
Power Supply in Overhead Cranes: Energy Chains vs. Festoons
Download this white paper to learn more about how both systems compare.