Modular plastic belts from Emerson Industrial Automation handle heavy loads

New heavy duty and extra heavy duty modular plastic belts from Emerson Industrial Automation (Booth 1559) provide a non-skid, energy-efficient conveyor surface for moving walkways, automotive assembly lines and general material handling of heavy loads, such as barrels, drums, kegs and pallets.

Emerson Industrial Automation’s heavy duty modular plastic belts can be easily retrofitted into existing conveyor frames, said Matt Stoneburner, director of marketing, material handling.

By Bob Trebilcock, Executive Editor
January 22, 2013 - MMH Editorial

New heavy duty and extra heavy duty modular plastic belts from Emerson Industrial Automation (Booth 1559) provide a non-skid, energy-efficient conveyor surface for moving walkways, automotive assembly lines and general material handling of heavy loads, such as barrels, drums, kegs and pallets. The System Plast heavy duty and extra heavy duty belts handle loads up to 5,400 lb/ft and 7,800 lb/ft and are among the highest in the industry for 2- and 2.5-inch (50.8 mm and 63.5 mm) pitch belts.

“These new belts allows for more load on the conveyor, a longer belt or more and heavier items on the belt,” said Matt Stoneburner, director of marketing, material handling. “The smooth, flat top allows for an easy transfer of product with no rust, dirt or grime that will damage the product.”

Both belts are ideal for moving assembly line floors where the corrosion resistant belt’s solid surface prevents tools, fasteners and small parts from being trapped, Stoneburner added.

The new belts are available in five different material types and provide a quiet, energy-saving alternative to chain and live-roller conveyor for general handling of heavy loads.

The belts’ unique design allows pusher bars to be attached, removed or replaced by the user at any time without disassembly of the belt, using drilling locators molded in on 1.96 inch (50 mm) centers. Both belts utilize a patent-pending retention clip for the hinge pin.

ProMat 2013 is scheduled to be held January 21-24, 2013 in Chicago’s McCormick Place South. The tradeshow will showcase the latest manufacturing, distribution and supply chain solutions in the material handling and logistics industry. Modern’s complete ProMat 2013 coverage.



About the Author

Bob Trebilcock
Executive Editor

Bob Trebilcock, executive editor, has covered materials handling, technology and supply chain topics for Modern Materials Handling since 1984. More recently, Trebilcock became editorial director of Supply Chain Management Review. A graduate of Bowling Green State University, Trebilcock lives in Keene, NH. He can be reached at 603-357-0484.


Subscribe to Modern Materials Handling magazine

Subscribe today. It's FREE!
Find out what the world's most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today!

Recent Entries

MHEM forecasts 9% growth for 2015 and 7% growth in 2016.

Event marks the 70th anniversary of industry association and event organizer MHI.

Large consumer packaged goods customer approves 24-volt packs for use in Class III pallet jacks.

2015 programs established for five committees: Education, Marketing and Communications, Membership, Industry Affairs and Standards, and End User Advisory Committee.

With lower energy prices sparking domestic economic gains, coupled with solid manufacturing and industrial production activity, improving jobs numbers, and a GDP number that shows progress, there is much to be enthused about when it comes to the economy . But that enthusiasm needs to be tempered, because big headline themes seldom tell the full story.

Comments

Post a comment
Commenting is not available in this channel entry.


© Copyright 2013 Peerless Media LLC, a division of EH Publishing, Inc • 111 Speen Street, Ste 200, Framingham, MA 01701 USA