RPA and StopWaste host reusable packaging workshop in Salt Lake City

The Reusable Packaging Association (RPA) is teaming up with StopWaste Partnership to host a Use Reusables Workshop in Salt Lake City, UT on March 21.
By Modern Materials Handling Staff
March 07, 2012 - MMH Editorial

The Reusable Packaging Association (RPA) is teaming up with StopWaste Partnership to host a Use Reusables Workshop in Salt Lake City, UT on March 21. Other participants in the workshop are the Utah College of Applied Technology, the Utah Manufacturers Association, and the Utah Department of Environmental Quality (UDEQ).

The content for the workshop is based on the RPA’s Reusable Packaging Curriculum Project that is being developed by the association’s Education Committee. The workshop is funded in part by a grant from the U.S. Environmental Protection Agency.

“Educating businesses about the economic benefits of reusables is essential to increasing their adoption,” said Jerry Welcome, President, RPA. “This workshop is one of several educational platforms we have planned for 2012 to share our broad expertise and first-hand experience with reusables with end users.”

RPA Education Committee members Norm Kukuk of ORBIS Corporation and LeRoi Cochran of IFCO Systems will present at the workshop on behalf of the RPA. Topics covered at the workshop will include measuring the financial impact of reusables, steps for implementing reusables, an overview of available resources and much more. There will also be a panel discussion on reusable packaging applications with various users from the Salt Lake City area.

To register for the conference, go to http://useresuablesdatc.eventbrite.com For a.dditional information on the workshop, visit the StopWaste website at http://www.reusables.com or co,ntact the RPA at .(JavaScript must be enabled to view this email address).

Subscribe to Modern Materials Handling magazine

Subscribe today. It's FREE!
Find out what the world's most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today!

Recent Entries

When DCs, plants, or any industrial facility needs more space, there are two basic options: going "out" by acquiring or building additional facilities, or "going up" by maximizing the cubic volume of existing facilities

PMMI connects end users and suppliers as they adapt to changing consumer demands.

Deployment of automated storage & retrieval (AS/RS) solutions has been delivering impressive improvements in labor or space savings within facilities for decades.

The total number of October shipments at 913,543 was flat compared to September, which was consistent with growth patterns in recent years, with 2014 up 2 percent, 2013 up 3 percent, and 2012 down 1 percent.

The secret to successful distribution center design is planning to make material handling equipment and software flexible and scalable.


Post a comment
Commenting is not available in this channel entry.

© Copyright 2015 Peerless Media LLC, a division of EH Publishing, Inc • 111 Speen Street, Ste 200, Framingham, MA 01701 USA