Curtain helps company achieve the best use of available space

Flexible, modular panels control climate, quality and costs for glass manufacturer.

By ·

Pittsburgh Corning is a world leader in innovative glass block products for commercial, institutional, government and residential building applications, and the only U.S.-based manufacturer of glass block. In 2011, the company began a new assembly operation in an under-utilized warehouse at its Port Allegany, Pa., manufacturing location. To prepare the warehouse, the company installed a curtain wall to create a climate-controlled, low-dust environment.

Eric Swartwout, the senior engineer responsible for the mechanical, electrical and environmental activities at the facility, determined that climate curtains (Goff’s Curtain Walls, would improve all three assembly area requirements. Producing Pittsburgh Corning’s multiple block systems requires a room temperature of 60° to 70° Fahrenheit so the assembly cures properly. The temperature difference between the assembly area and warehouse area was often extreme, says Swartwout, and required workers to put on jackets.

It’s also essential to have a low-dust environment in assembly. To control dust, a multi-layer, 0.5-inch thick epoxy coating was applied over the assembly area’s floor. The remaining floor area of the warehouse remained concrete. To prevent dust from migrating between the clean and uncontrolled sides of the warehouse, Swartwout knew he wanted a flexible rather than a fixed wall.

“Sometimes we manufacture very large assemblies, or we may have to move equipment from one side to the other,” Swartwout says. “We wanted the ability to move an item that would be much too large to fit through a standard door. Also, we wanted the option to re-size the assembly area if necessary.”

The new curtains feature a unique overlapping panel design that enables the curtains to maintain an insulation factor of R-5 throughout the curtain, not just “non-seam” areas. If needed, an R-20+ factor can be achieved by installing multiple layers. The fire-resistant curtains come in 60-inch-wide panels and were customized to 30 feet high. To provide easy access between the two sides of the warehouse, the curtain uses an optional galvanized steel track and roller system.

“The curtains were light enough that in-house staff were able to install it without having to hire contractors,” adds Swartwout.

Eight gas heaters originally heated the entire warehouse area. More than 30 years old and destined to be replaced with an energy efficient system, five of these heaters are not being used. After installing the curtains, Pittsburgh Corning now only operates the three heaters on the assembly side of the warehouse, for a 60% reduction in energy costs.

About the Author

Josh Bond, Contributing Editor
Josh Bond is Senior Editor for Modern, and was formerly Modern’s lift truck columnist and associate editor. He has a degree in Journalism from Keene State College and has studied business management at Franklin Pierce University.

Subscribe to Modern Materials Handling Magazine!

Subscribe today. It's FREE!
Find out what the world’s most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today!

Article Topics

Ergonomics · Goff's · June 2013 · · All Topics
Latest Whitepaper
Hydrogen, the Future of Materials Handling
Large, successful organizations are integrating hydrogen fuel cell technology into their lift truck fleets and benefiting from lower operational costs, reduced emissions and improved reliability.
Download Today!
From the October 2016 Issue
Brownells’ new Iowa distribution center has taken touches—and miles—out of the order fulfillment process and increased throughput with near 100% accuracy.
System Report: Brownells new DC is flexible and responsive
Pallet Usage Report: Pallets Remain Critical in the Modern-Day Warehouse
View More From this Issue
Subscribe to Our Email Newsletter
Sign up today to receive our FREE, weekly email newsletter!
Latest Webcast
Pallets: Supporting Product, Processes and the Enterprise
The smallest leak in performance or cost can bring a lean, nimble and speedy supply chain to a halt. During this 30-minute webcast we'll examine how Modern's readers use pallets to keep the wheels turning as they maneuver a road filled with sharp edges and potholes.
Register Today!
Modern Materials Handling’s 2017 Casebook Collection
The 2017 Casebook features more than 35 case studies that put the spotlight on successful innovation...
Brownells: Designing for Efficiency and Growth
Brownells’ new Iowa distribution center has taken touches—and miles—out of the order...

Industry celebrates National Manufacturing Day
Fourth annual Manufacturing Day is a grassroots effort by U.S. manufacturers to improve the public...
American Eagle Outfitters’ omni-channel journey
The fashion retailer has used warehouse execution software and automation to create a true...