How Federated uses fans to further sustainability

A Canadian retail co-op has embraced sustainability to reduce its costs and return the savings to its members and customers.

Warehouse in the News

Teklynx and SiteHawk partner to deliver EHS labeling solutions
North Texas WERCouncil to hold 16th Annual Warehousing Resource Convention
Robotic Piece Picking Hits Tipping Point
Cold storage specialist turns to Cloud WMS
Measure irregular-shaped items
More Warehouse News

Warehouse Resource

Evolution of the Retail Fulfillment Operation
It’s an omni-channel world, and retail warehouse and DC operations must now seamlessly orchestrate a combination of software, automation, hardware and supporting equipment to meet ever-increasing customer expectations or be rendered irrelevant.
All Resources
By ·

With the cost of heating the Saskatoon warehouse going through the roof—literally—Federated Co-operatives was interested in testing whether thermal destratification in its warehouses would result in significant heat cost reductions and the reduction of the amount of natural gas needed to heat its facilities. Destratification is what happens when layers of warm air that form in one part of a facility mix with layers of cooler air in another part of a facility to produce a constant temperature.

According to Trevor Carlson, environmental and technical services manager, Federated believed a fair amount of heat was being trapped or lost through the ceiling. The difference between the temperature of the air at the floor level and the underside of the roof deck in some distribution centers can be up to 30 degrees, depending on the time of year. If that warm air could be brought down to circulate through the building, then Federated could reduce the rate at which its buildings were shedding heat through the roof.

To put the theory to the test, Federated installed five 24-foot large-diameter, low-speed fans (Big Ass Fans) in the 80,000-square-foot loading dock area back in 2007. The retail co-operative then began to measure its heat index in the pilot area, a measurement that relates the day’s temperature to the energy demands of the heating system. The index is expressed as Btu/ft2/degree day. Before the installation of the fans, the heat index was 4.49 Btu/ft2/degree day. By the end of 2008, the heat index had been reduced by 10% to 3.61 Btu/ft2/F.

“We believe we saved $19,800 in the first year in natural gas consumption as a result of the fans,” says Carlson.

Since then, Federated has expanded the use of fans to other facilities, says Philip Thiemann, warehouse operations director. In Winnipeg, for instance, the co-op installed a fan in a temperature controlled dock area where hot air was building up in the hot summer months around the dock doors.

“We had to turn the thermostats down, which put a constant demand on the refrigeration units,” he says. “The air movement from the fans allows the air to mix and even out the temperatures.” In the process, Thiemann adds, workers have found that the new fans keep the ambient temperature areas more comfortable on hot days for less money.

“The big fans use about 3 amps an hour compared to 180 amps for the fans we had been using in the summer,” he says. “The electrical savings in the summer are greater than the gas savings in the winter and the workers are more comfortable.”

click here to download the PDF article
click here to download PDF article


About the Author

Bob Trebilcock
Bob Trebilcock, editorial director, has covered materials handling, technology, logistics and supply chain topics for nearly 30 years. In addition to Supply Chain Management Review, he is also Executive Editor of Modern Materials Handling. A graduate of Bowling Green State University, Trebilcock lives in Keene, NH. He can be reached at 603-357-0484.

Subscribe to Modern Materials Handling Magazine!

Subscribe today. It's FREE!
Find out what the world’s most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today!

Latest Whitepaper
Download: Material Handling Technology Survey Results
Readers are buying and replacing warehousing and distribution center software, but not before they do their own homework.
Download Today!
From the July 2017 Modern Materials Handling Issue
Shuttle and case dispensing technologies help Southern Glazer’s Wine & Spirits keep up with demand in one of the most competitive markets in the country.
Southern Glazer’s Wine & Spirits: Designed to Last
Automation: What’s at the heart of your system?
View More From this Issue
Subscribe to Our Email Newsletter
Sign up today to receive our FREE, weekly email newsletter!
Latest Webcast
Warehouse Execution Systems (WES): The Pathway to Same-Day Fulfillment
This webinar explores the processes and technologies enabling same-day, same-hour order fulfillment using intelligent supply chain software.
Register Today!
EDITORS' PICKS
Southern Glazer’s Wine & Spirits: Designed to Last
On Long Island, the country’s premier distributor of wine and spirits turned to shuttle and case...
GE Healthcare System Report: Lean repairs
Self-driving mobile robots improve cycle times and reduce floor space at GE Healthcare’s new...

Materials Handling Innovation (and why it matters)
Every company considers itself an innovator. It’s time to include materials handling leaders in...
Thrive Market’s Startup Distribution Network
How does a fastgrowing, e-commerce startup company build out order fulfillment capabilities? Thrive...