Federated Co-operatives: Lean, green machine

Federated Co-operatives uses technologies that are environmentally and worker friendly in its Saskatoon warehouse.
By Bob Trebilcock, Executive Editor
December 02, 2015 - MMH Editorial

Federated Co-operatives Limited
Saskatoon, Saskatchewan
Size: 302,000 square feet plus a planned 165,000-square-foot addition
Products handled: Full range of food products, including dry groceries, tobacco products, produce, dairy cooler and frozen foods. Milk and meat are crossdocked.
Stock keeping units: 13,500+
Throughput: 1.4 million cases per month
Employees: 160 in operations
Shifts/Days: 2 shifts/7 days plus some third-shift activities

Receiving: The receiving process begins prior to the arrival of a trailer in the receiving and shipping area (1) when a vendor sends an advance ship notification (ASN) and books a delivery appointment. Once the trailer arrives, Federated manages a paperless receiving process. Palletized product is unloaded from the truck and scanned with handheld devices. With that information, the warehouse management system (WMS) creates a license plate bar code tag and pallets are staged in the receiving and shipping staging area (2) for putaway. Priority is given to product that is destined for the refrigerated (3) or freezer (4) storage areas.

Putaway: Although there is some floor storage in the Saskatoon facility, most product will be stored in pallet rack, regardless of whether the product is stored in refrigerated (3), freezer (4) or ambient temperature (5) areas. The lower levels of the racks are used for picking while the upper levels of the rack are used for reserve storage. The WMS first determines whether product should be stored in reserve storage on the upper levels or if there is an immediate need for that product in a pick module on the lower levels. In addition, the system manages storage locations based on expiration dates to ensure that product nearest its best-by dates are picked first. Using that criteria, the WMS directs the driver to an aisle or a segment within an aisle. The driver chooses the best available storage location and updates the WMS.

Crossdocking: Some products, especially meat and milk (6), are crossdocked directly to stores using a flow-through model. When product arrives that can be shipped directly to a store, it is put away into an available pick location in a dynamic storage and picking area in the flow-through area (7). Once all of the product has been putaway, the WMS drops orders for that merchandise and order selectors begin to fill those orders.

Picking: Whether product is stored in the flow-through area (7) or in the pick modules (3, 4, 5), the WMS sorts orders into assignments, prioritizes the sequence the orders will be picked based on a set of rules established by Federated, and begins to deliver them to the floor. Some order selectors use RF scanners but most pick using voice recognition technology. In most instances, order selectors pick full cases to pallets. However, tobacco, confectionary, and health and beauty products are picked by item to totes. In those instances, the WMS creates a license plate ID tag for a tote that is similar to a pallet tag. Order selectors are directed to pick items into a tote. Once the tote is full, it is closed and loaded onto a pallet. The order selector then begins picking to another tote.

Shipping: Once a pallet is picked, it is directed to the receiving and shipping staging area (2). From there, it will be loaded onto the next available trailer in the shipping area (1). In Saskatoon, Federated uses multiple temperature trailers. Frozen products are loaded first, followed by refrigerated products and finally dry groceries to close out the trailer.

image

System Suppliers

             
Fans:
HVLS Industrial Fan

Case flow rack:
 
 RhinoTrac Carton Flow Roller System
 
 Span-Track Carton Flow

Pallet rack:
 
 The Pallet Mole high density storage solution
 
 Pallet Flow Rack

Lift trucks:
 
 The Right Lift Trucks For the Job
 
 A Complete Line of Lift Trucks

Voice recognition:
Voice-directed support for multiple workflows

WMS:
Warehouse Management Solutions

Dock doors:
Sectional Knockout Door for high wind load environments

Dock equipment:
Dock Levelers

Wooden pallets:
 
Industry standard 48x40 wood pallet

For all the latest Materials Handling Products visit www.mhpn.com


About the Author

Bob Trebilcock
Executive Editor

Bob Trebilcock, executive editor, has covered materials handling, technology and supply chain topics for Modern Materials Handling since 1984. More recently, Trebilcock became editorial director of Supply Chain Management Review. A graduate of Bowling Green State University, Trebilcock lives in Keene, NH. He can be reached at 603-357-0484.


Subscribe to Modern Materials Handling magazine

Subscribe today. It's FREE!
Find out what the world's most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today!

Recent Entries

Materials handling among fastest-growing segments as 2015 orders increased 14% in units and 11% in dollars over 2014's record year.

Prevent unwelcome and unpleasant surprises in a new installation or upgrade that can cause setbacks in your schedule and budget.

MagneMotion specializes in intelligent conveying systems used in automotive, general assembly, packaging and material handling applications.

Certification enables participants to build and sustain a maintenance program, establish KPIs, increase productivity and build a problem-solving culture.

Estimate comes in higher than the 10-year average of 2.7%, but falls short of the NRF’s 2015 estimate of 4.1%.

Comments

Post a comment
Commenting is not available in this channel entry.