MMH    Topics     News

ATA reports improved tonnage results for November


Latest Material Handling News

November trucking volumes largely recovered from the Hurricane Sandy-induced declines in October, according to data released by the American Trucking Associations (ATA) today.

The ATA said that seasonally-adjusted (SA) truck tonnage in November—at 118.0 (2000=100) was up 3.7 percent in November, cancelling out the revised 3.7 percent decline from October, which was revised from 3.8 percent. This gain was the first for the SA since January, said ATA officials, and snapped a three-month skid of declines representing a cumulative drop of 4.6 percent.

On an annual basis, the November SA is up 1 percent, following a 2.1 percent annual decline in October. And on a year-to-date basis through the first 11 months of the year it is up 2.8 percent.

The ATA’s not seasonally-adjusted (NSA) index, which represents the change in tonnage actually hauled by fleets before any seasonal adjustment, was 115.7 in November, 6.5 percent below October and 0.4 percent higher than November 2011.

As LM has reported, some industry analysts maintain that the not seasonally-adjusted index is more useful, because it is comprised of what truckers haul. As defined by the
ATA, the not seasonally-adjusted index is assembled by adding up all the monthly tonnage data reported by the survey respondents (ATA member carriers) for the latest two months. Then a monthly percent change is calculated and then applied to the index number for the first month.

“Sandy impacted both October’s and November’s tonnage readings,” ATA Chief Economist Bob Costello said in a statement. “But it was still good to see tonnage snap back in November.”  Costello added that he expects a boost to flatbed tonnage from the rebuilding in the areas impacted by Sandy, but most of that won’t happen until the spring when the money starts flowing and the weather is conducive to building. 

And he also said if a fiscal cliff resolution is not imminent it is within reason to expect less tonnage as households will have less money to spend, which will dint consumer spending.

But if an agreement is reached, Costello expects that tonnage growth could decelerate in 2013, with better housing starts and auto sales offset by slower factory output and consumer spending.

Various shippers and carrier have repeatedly told LM that volumes remain in a holding pattern to a certain degree, with no real positive indications that things will change soon.

At last month’s NITL-IANA TransComp exhibition, both shippers and carriers explained that they expect current volumes and market conditions to largely remain at current levels, due to the nation’s fiscal challenges, which, if progress is not made by Congress, could drag the economy back into a recession and nix many of the hopeful indicators seen in recent months.

And sluggish retail sales numbers and declining manufacturing output, which both are key supply chain drivers, have also crimped overall economic output, too.

“When you look at what has happened in both the freight economy and the overall economy over the last 9 months, things have really flattened,” said Eric Starks, president of freight transportation forecasting firm FTR Associates. “It is a somewhat stagnant environment, especially with retail sales. But if we can get past the fiscal cliff with a good compromise that makes sense, it could be very beneficial.”


Article Topics

American Trucking Associations
Truck
Trucking
   All topics

News & Resources

Latest in Materials Handling

RoboGeorgia launches to make Georgia a leading robotics and automation hub
Vehicle-mounted computers: Beyond rugged
New packaging idea for the cold chain
Autonomous mobile robots (AMRs) offer modern solution to challenges of traditional farming
Hyster-Yale Group provides students with real-world AI experience in 2024 Kellogg Design Challenge
KION Group’s board extends CEO Rob Smith’s contract by five years
UniCarriers Forklift joins Quality Equipment in opening celebration of new location
More Materials Handling

About the Author

Jeff Berman's avatar
Jeff Berman
Jeff Berman is Group News Editor for Logistics Management, Modern Materials Handling, and Supply Chain Management Review and is a contributor to Robotics 24/7. Jeff works and lives in Cape Elizabeth, Maine, where he covers all aspects of the supply chain, logistics, freight transportation, and materials handling sectors on a daily basis.
Follow Modern Materials Handling on FaceBook

Subscribe to Materials Handling Magazine

Subscribe today!
Not a subscriber? Sign up today!
Subscribe today. It's FREE.
Find out what the world's most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today.

Latest Resources

Materials Handling Robotics: The new world of heterogeneous robotic integration
In this Special Digital Edition, the editorial staff of Modern curates the best robotics coverage over the past year to help track the evolution of this piping hot market.
Case study: Optimizing warehouse space, performance and sustainability
Optimize Parcel Packing to Reduce Costs
More resources

Latest Resources

2023 Automation Study: Usage & Implementation of Warehouse/DC Automation Solutions
2023 Automation Study: Usage & Implementation of Warehouse/DC Automation Solutions
This research was conducted by Peerless Research Group on behalf of Modern Materials Handling to assess usage and purchase intentions forautomation systems...
How Your Storage Practices Can Affect Your Pest Control Program
How Your Storage Practices Can Affect Your Pest Control Program
Discover how your storage practices could be affecting your pest control program and how to prevent pest infestations in your business. Join...

Warehousing Outlook 2023
Warehousing Outlook 2023
2023 is here, and so are new warehousing trends.
Extend the Life of Brownfield Warehouses
Extend the Life of Brownfield Warehouses
Today’s robotic and data-driven automation systems can minimize disruptions and improve the life and productivity of warehouse operations.
Power Supply in Overhead Cranes: Energy Chains vs. Festoons
Power Supply in Overhead Cranes: Energy Chains vs. Festoons
Download this white paper to learn more about how both systems compare.